Hey all,
Tested out my new one handed tubing tool. Ran around $25 in parts. Used it today to put new tap fittings on existing drops. Worked great.
CE8D0E86-EC01-4F3E-8C99-86AC4BC36511.jpg
Hey all,
Tested out my new one handed tubing tool. Ran around $25 in parts. Used it today to put new tap fittings on existing drops. Worked great.
CE8D0E86-EC01-4F3E-8C99-86AC4BC36511.jpg
Camp Wokanda
Peoria Park District
2023 - 210 on 3/16 shurflo, sap storage shack w/ 1100 gallon tank - 123 gallons
2022 - 210 on 3/16 shurflo, homemade vac filter & water jacket canner - 104 gallons
2021 - 215 on 3/16 shurflo, added 2nd membrane to RO - 78 gallons
2020 - 210 on 3/16 shurflo, upgraded hp pump on RO - 66 gallons
2019 - 150 on 3/16 shurflo, Deer Run 125 dolly RO - 73 gallons
2018 - 120 on 3/16 shurflo, 2x6 raised flue w/hood, homemade arch w/ AUF & AOF - 34.5 gallons
Nice job mol1jb!
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Looks good. A lot easier than using the two handed tool for drop lines and taps.