I'm wondering if anyone is still making 2 handed tubing tools reasonably priced. Also, I can't seem to find the post that has the measurements of a two handed tool in it. Does anyone remember where that's located? Thanks.
I'm wondering if anyone is still making 2 handed tubing tools reasonably priced. Also, I can't seem to find the post that has the measurements of a two handed tool in it. Does anyone remember where that's located? Thanks.
Chad
2014: 12 taps, 5 gal buckets
2015: 15 taps on bags
2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
2019: No tapping
2020: 175 taps
2021: 300 taps, homemade RO and releaser
2022: 600+ taps
Did a quick Advanced Search with "Two handed tool" in Thread Name...narrows it down pretty quickly. I remembered someone making a pretty nice tool - this is what I found:
http://mapletrader.com/community/sho...ht=handed+tool Good luck
Last edited by johnallin; 02-02-2020 at 08:45 AM.
John Allin
14x18 Hemlock Timber Frame Sugar House 2009
Leader 2x6 w/Patriot Raised Flue Pan 2009
Leader Steam Hood 2014 - Clear Filter Press 2015
Leader Revolution Pan and SS Pre-Heater 2016
CDL Hobby RO & Air Tech L25 Hi Vac Pump 2019
06' Gator HPX to collect wood & sap
14' Ski-Doo Tundra for winter work in the woods
Great Family 3 grown kids+spouses and 7 grand kids who like the woods
7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.
I have a used one for sale in the classifieds.
1000 taps on vac down to 100+ buckets 99% sugars
2x5 SL Hi-Output Raised Flue Corsair evaporator
SL Short bank press with CDL diaphragm pump
Leader Micro 1 RO for 2024
Constantly changing
2010:36 gal 2011:126 gal 2012:81 gal 2013:248 gal 2014: 329.5 gal 2015:305 gal 2016:316 gal 2017:258 gal 2018:147 gal 2019:91 gal 2020:30 gal 2021:30 gal 2023:50 gal Total since 2010: 2047.5 gal
Tapping the same trees my great, great and great grandfathers tapped.
What size tubing will fit the two handed tool you have for sale?
2004 - 2012 2x3 flat pan 25 to 60 taps
2012 2x3 new divided pan w/draw off 55 taps
2018 - didn't boil surgery - bought new evaporator
2019 new SML 2x4 raised flue high output evap. 65 taps
made 17 gal. syrup
2020 - only put out 53 taps - made 16.25 ga.l syrup
2021 - Didn't work out
2022 - 25 taps on bags / 8 taps on 3/16's line - late start
1000 taps on vac down to 100+ buckets 99% sugars
2x5 SL Hi-Output Raised Flue Corsair evaporator
SL Short bank press with CDL diaphragm pump
Leader Micro 1 RO for 2024
Constantly changing
2010:36 gal 2011:126 gal 2012:81 gal 2013:248 gal 2014: 329.5 gal 2015:305 gal 2016:316 gal 2017:258 gal 2018:147 gal 2019:91 gal 2020:30 gal 2021:30 gal 2023:50 gal Total since 2010: 2047.5 gal
Tapping the same trees my great, great and great grandfathers tapped.
I have a two handed tool with the tubing cutter I believe it may be from Leader ( reply to DOCSMAPLESYRUP)
Last edited by mapleguy; 02-02-2020 at 08:49 AM.
I’ve built some in the past
6784357E-E9BD-4D80-889C-D84023A73EF6.jpg
B979F37C-A926-437B-9DFF-4D4DF33AAECB.jpg
2018 - 8 Taps on Buckets - homemade 2x2 pan and wood arch - 1.25 gallons
2019 - 30 Taps on Buckets - new Sugarhouse , 2x4 divides pan and homebuilt
evaporator! - 3.5 gallons
2020 - planning 50 Taps on 3/16 tubing with shurflo vacuum
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
Just take a 4 inch or so piece of 5/16, split it lengthways removing about a third of the tubing. Take the larger piece that you just made and clip it over the 3/16 tubbing, clamp your tool on the 5/16 piece and your good to go.
just remember to take your shims with you to the next spot you need to cut in a tee.
backyard hobbyist
Mason 2x3 w/AUF
2020 - added small vacuum and gravity 5/16 tubing and sap sacks
N 42* 18' 31."
W 79* 34' 15."
https://www.saptapapps.com/map/31868...-aab748a6394e/
John Allin
14x18 Hemlock Timber Frame Sugar House 2009
Leader 2x6 w/Patriot Raised Flue Pan 2009
Leader Steam Hood 2014 - Clear Filter Press 2015
Leader Revolution Pan and SS Pre-Heater 2016
CDL Hobby RO & Air Tech L25 Hi Vac Pump 2019
06' Gator HPX to collect wood & sap
14' Ski-Doo Tundra for winter work in the woods
Great Family 3 grown kids+spouses and 7 grand kids who like the woods
7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.