Thats alot of wisdom "flats", thks
Thats alot of wisdom "flats", thks
5th generation
2 1/2 Buckets
815 gravity
2 new flat pans. Back pan now has 16 V's
Rebuilt the block arch 3x12
Homemade pre-heater,steamhood
MES Dolly RO
No, just a lot of posting with a barely reasonable amount of knowledge. I'm just willing to share what I know, right or wrong.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Last edited by Trapper2; 02-03-2020 at 07:57 AM.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
Yes indeed! Thank you!
Thanks Dave for contributing so much to these forums. It's always great to get advice from seasoned veterans.
Dave Barker
2014 30 taps, steam tray pans
2015 ~100 taps, in conjunction with University of Louisville
2x5 Smoky Lake hybrid pan
2022 150 taps
Thank you for all you do for this community! Mapletrader just wouldn't be the same.
CDL 2.5*8 Venturi with all the bells
Leader Clear 5 bank filter press
Memprotec 350H RO
600ish taps and looking for more.
Thanks Dave. It's guys like you that make this forum great.
2x3 Patrick Phaneuf Divided Pan
Homemade arch
RB20 RO Bucket
121 taps total
Sugar Shack in future
Wife into it as much as me
Also do homebrew
http://s928.photobucket.com/albums/ad121/ZMANSYRUP/
Thanks for you willingness to share- You have sure have been willing to share enough to get us off our feet and full swing into the business. Dave sent me his RO manual, has made countless replies to my questions, and others, that I've been able to glean a little info to improve my equipment, both to store bought, second hand and home made(RO/AOF/Stack, accessories, pumps, solar, .. etc-) the list goes on & on. Thank you!
Ben Walker
'12 15 jugs - Steam pans
'17 125 3/16 - 18" x 72" drop flue on homemade arch
'18 240 3/16 - Deer Run 125
'19 450 3/16 - Converted RO to electric/added a membrane
'20 600 3/16 - Maple Pro 2x6 Raised Flue, added AOF/AUF
'21 570 3/16 - Built steam hood, Smoky Lake filter press
'22 800 3/16 - Upgraded RO to 4 4x40
'23 500 3/16 - Re-plumbed RO, new "Guzzler"
'24 500 3/16 - Steam Away, DIY 8x40 RO
Yes David, thank you. You were very helpful in getting my Deer Run 260 R.O. up and running.
Leader 3x8 Patriot raised flue
800 taps on vacuum
100 buckets around the yard
A lot of help to make it fun