+ Reply to Thread
Page 5 of 5 FirstFirst 12345
Results 41 to 46 of 46

Thread: Backyard Syrup Enthusiasts 2020

  1. #41
    Join Date
    Mar 2020
    Location
    Springfield, MA
    Posts
    11

    Default

    Thanks for the tip Dave! Checked in with Bill and he agrees to raise the front up to the 2" below the pan mark. I'll take care of that when I mortar.

  2. #42
    Join Date
    Mar 2020
    Location
    Springfield, MA
    Posts
    11

    Default

    OK now really done bricking.

    IMG_0441.jpg
    IMG_0442.jpg

  3. #43
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    10,458

    Default

    It will become very obvious how that helps when you boil, you will see a very hard boil over that partition. It will be the hardest in the entire pan. Much of the heat causing that would have otherwise gone up the stack.
    Dave Klish about 1320 taps in '15, downsized after I lost my help, about 450-500 planned for 2021 (and after?)
    2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
    3x8 raised flue evaporator
    250 GPH converted to electric, RO by Ray Gingerich
    6.32 KW solar system, 1.48KW is battery backed up, all net metered
    http://s1041.photobucket.com/albums/...anssugarhouse/
    website: www.cnymaple.com

  4. #44
    Join Date
    Mar 2014
    Location
    Ogdensburg, NY
    Posts
    110

    Default

    That is just how my half-pint is bricked. You will like boiling with that rig.
    2016 - helped at afriend with a small operation, 300+ taps. = hooked
    2017 - 20 taps @ home, 1 gal @ home on propane, then hauled to friends operation
    Bought a whole shack locally, with a Leader 1/2 Pint, moved it home
    2018 - 50 taps, 9 on 3/16 gravity and 41 pails -14 gallons of good sweet stuff
    2019 - 27 taps, 17 on 3/16 gravity and 10 on pails - 12-3/4 gallons of good sweet stuff (most fun I've had with this hobby)

  5. #45
    Join Date
    Feb 2016
    Location
    Mount Vernon Maine
    Posts
    103

    Default

    Hope everyone is having a great, albeit dry, summer so far. I was surprised to see some new posts.

    I have had an issue with my rear pan (of three) not getting hot till the fire has been going a while. This partition might be a good idea to get it hotter faster. I'll put it on the fall list of things to do!

    Good luck Aaron with your new set-up. Looks great.
    2x4 concrete block arch with three steam trays
    Separate warming stove/steam tray
    2016 12 taps, 3 gallons
    2018 15 taps, 7 gallons
    2019 38 taps, 13.6 gallons
    2020 40 taps, 13.7 gallons
    Mostly sugar maples, a few reds on 200 year old homestead

  6. #46
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    10,458

    Default

    The next piece of advice is to never use a damper on an wood fired evaporator smoke stack and give it loads of combustion air. A blower help with that. An evaporator works best when it burns as hot as you can get it, but be sure to never run low in the pans or you will burn them. A good starting depth is about 2", but after you get familiar with that gradually start reducing the pan depth until you get to 1-1.25". Then don't leave it unattended and keep an OH $#!T bucket of sap or potable water ready if things get away from you.
    Keep it fun!
    Dave Klish about 1320 taps in '15, downsized after I lost my help, about 450-500 planned for 2021 (and after?)
    2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
    3x8 raised flue evaporator
    250 GPH converted to electric, RO by Ray Gingerich
    6.32 KW solar system, 1.48KW is battery backed up, all net metered
    http://s1041.photobucket.com/albums/...anssugarhouse/
    website: www.cnymaple.com

+ Reply to Thread
Page 5 of 5 FirstFirst 12345

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts