Do you add sap to each of the chambers as to not establish a gradient?
Using a divided pan as a flat pan.
Do you add sap to each of the chambers as to not establish a gradient?
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
You won't get a gradient if you don't draw.
2016 - helped at afriend with a small operation, 300+ taps. = hooked
2017 - 20 taps @ home, 1 gal @ home on propane, then hauled to friends operation
Bought a whole shack locally, with a Leader 1/2 Pint, moved it home
2018 - 50 taps, 9 on 3/16 gravity and 41 pails -14 gallons of good sweet stuff
2019 - 27 taps, 17 on 3/16 gravity and 10 on pails - 12-3/4 gallons of good sweet stuff (most fun I've had with this hobby)
If you keep adding raw sap to the same end of the pan it will form a gradient. Just add to each end alternately and it won't form a gradient.Originally Posted by phil-t
Jake
smoky lake 2x6 drop flue SSR on homemade arch
235 taps on 2 gast 1550s and lappiere releasers
24x12 sugar house
2019 Kubota L2501 work horse
Is there a reason you don't want a gradient?
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I do this on my 3 section half pint pan with the last collection of sap of the season. I have no problems adding sap, like always, and boiling it as a batch. if there was a gradient, it was minimal and when I got to a 1/2" in the pan, I drew it all off, tested and finished on propane, in a large pot. Didn't have far to go to syrup.
2016 - helped at afriend with a small operation, 300+ taps. = hooked
2017 - 20 taps @ home, 1 gal @ home on propane, then hauled to friends operation
Bought a whole shack locally, with a Leader 1/2 Pint, moved it home
2018 - 50 taps, 9 on 3/16 gravity and 41 pails -14 gallons of good sweet stuff
2019 - 27 taps, 17 on 3/16 gravity and 10 on pails - 12-3/4 gallons of good sweet stuff (most fun I've had with this hobby)
I do a lot of my sugaring alone and I have many other duties during syrup season. Shed hunting, sap gathering, wood cutting, etc. Presently with a flat pan, 36x42 I add 30 gallons of sap and 2 arm loads of wood and I leave for 2 hours or so, come back and refill both.
I don’t have the time to do a draw off every 10 minutes or so.
I have a old Sugar maker that wants to give me his 2x5 arch and pan after this season.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
I guess that makes sense somewhat. It must not boil very hard during the later part of those 2 hours, but do what you need to. If it works for you great, I've never left my pans longer than maybe 5 minutes unattended, if that when boiling. Does it actually boil or just simmer?
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Correct Dave, It does not boil as hard at the end of the 2 or 3 hours as it does at the beginning , but I guess what matters to me, while I was gone pruning 20-30 apple trees another 20 - 30 gallons of sap disappeared. IMG_5854.jpg
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
Dang I should be pruning apple trees! Thanks!
Regards,
Chris
Casbohm Maple and Honey
625 roadside taps + Neighbors bring some sap too!
3x10 King, WRU, AOF and AUF
12" SIRO Filter Press.
2015 Ford F250 PSD sap hauler
One Golden named Maggie, Norwegian Forest Cat named Lucy
Too many Cub Cadets
Ford Jubilee and several Allis WD's, and IH tractors
1932 Ford AAB ton and a half, dump truck
www.mapleandhoney.com
IMG_9651.jpg007 (3).jpgIMG_9706.jpg
These pictures are to give you an idea what I'm currently doing on a 3X4 pan and arch.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
Posting Permissions
Reply With Quote
