+ Reply to Thread
Results 1 to 4 of 4

Thread: Needle valves

  1. #1
    Join Date
    Nov 2018
    Location
    Franklin, PA
    Posts
    17

    Default Needle valves

    I'm wondering what you all use for needle valves.

    Last year in my RO setup, I bought a cheap 1/2" needle valve, but what I found was the max flow on it was too low, so even when I opened it up fully, I was still seeing 180-220 PSI...
    I'm thinking I need a better needle valve that will allow more flow through when it's wide open to allow for better flushing.. I suppose I could also add a gate/ball valve in there to open it wide up...

    btw, I'm running a 5 series procon, so max PSI is 250 and flow rate is 5 GPM. All schedule 40 PVC 1/2"

    any recommendations would be appreciated, especially if they were budget conscientious recommendations
    2019 290 taps on 3/16"
    2018 20 taps on milk jugs
    2017 10 taps on milk jugs

  2. #2
    Join Date
    Mar 2015
    Location
    Westfield, NY
    Posts
    195

    Default

    Not sure of your set-up, but could you plumb in a tee above and below the needle valve with a ball valve in between the tee's to work as a by-pass when you need full flow and not touch the needle valve at all? Just a thought.
    backyard hobbyist
    Mason 2x3 w/AUF
    2020 - added small vacuum and gravity 5/16 tubing and sap sacks
    N 42* 18' 31."
    W 79* 34' 15."
    https://www.saptapapps.com/map/31868...-aab748a6394e/

  3. #3
    Join Date
    Feb 2007
    Location
    CAPAC MICHIGAN
    Posts
    726

    Default

    2x6 RAISED FLUE PANS
    by WF MASON
    650 taps on vac.
    100 on bags

  4. #4
    Join Date
    Mar 2013
    Location
    Campbellford, on
    Posts
    642

    Default

    I have the same issue with my current RO. Had to plumb in a bypass valve for flushing and washing.
    Maple Rock Farm
    www.Maplerockfarm.ca
    380 taps on Vacuum
    18”x60” Lapierre propane evaporator with Smokey Lake auto draw off
    Homemade 3 post RO with MES membranes
    Ford TS110 tractor sap hauler

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts