+ Reply to Thread
Results 1 to 3 of 3

Thread: Looking for stainless 8x40 membrane housing

  1. #1
    Join Date
    Mar 2009
    Location
    North Augusta
    Posts
    97

    Default Looking for stainless 8x40 membrane housing

    Hi all

    Anyone know where I can get a 8x40 stainless steel membrane housing ? I have built a couple multi membrane 4x40’s but looking to go bigger.

    Thanks in advance

    Darrell
    Powered by oil fired 3X8 Lapierre cooker
    1478 taps
    330 GPH RO
    H20 Auto Drawoff
    10" cdl Filter Press
    2 adult kids
    Dog
    "memories of the old way"
    Kioti CK27
    Www.halladaymaple.ca

  2. #2
    Join Date
    Nov 2010
    Location
    Barnet, VT
    Posts
    2,580

    Default

    Bought one from MES several years ago. Cost about $1000 then.
    William
    950 taps
    3 X 12 Thor pans on a Brian Arch
    CDL 600 expandable

  3. #3
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,564

    Default

    I bought 2 on Ebay maybe 6-8 yrs ago (4x40). On Ebay I found 2 choices, both SS, ones rated for 250 PSI and ones rated at 300PSI, I bought the 300's. I don't recall the price but they were well under the $1000 price for 2 combined. At this point I'd guess they were maybe 300-350 total for 2. They were new, not used. You can add 2 more 4x40's for more performance.
    Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts