+ Reply to Thread
Results 1 to 9 of 9

Thread: Hobart Mixer

  1. #1
    Join Date
    Nov 2008
    Location
    st.marys,pa.
    Posts
    53

    Default Hobart Mixer

    I purchased a Hobart 20qt. mixer to make my sugar. Is there anything I should know before trying it. How much syrup do you start with. will the paddles reach the sides of the bowl?

  2. #2
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    4,898

    Default

    7810,
    I do a gallon to gallon and a half. Might be able to do more, that is just what works for me. My paddle does a good job of getting the sides but I also stop a couple times and scrape the sides to get a better mix. Also wipe the moisture off the under side of the head. I run in low gear.
    Regards,
    Chris
    Casbohm Maple and Honey
    600 roadside taps
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors

    www.mapleandhoney.com

  3. #3
    Join Date
    Nov 2008
    Location
    st.marys,pa.
    Posts
    53

    Default

    Quote Originally Posted by Sugarmaker View Post
    7810,
    I do a gallon to gallon and a half. Might be able to do more, that is just what works for me. My paddle does a good job of getting the sides but I also stop a couple times and scrape the sides to get a better mix. Also wipe the moisture off the under side of the head. I run in low gear.
    Regards,
    Chris
    Thanks Chris very helpful

  4. #4
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    4,898

    Default

    7810,
    I stop when the bowl is fairly cool to the touch and the sugar still has some moisture. Check the creep of the sugar. You may need to keep going? You can mix way too long and it will beat the sugar to a very fine grain. Done ask me how I know! I really like these to make sugar! Very easy. Post some pictures too!
    Regards,
    Chris
    Casbohm Maple and Honey
    600 roadside taps
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors

    www.mapleandhoney.com

  5. #5
    Join Date
    Feb 2018
    Location
    WV
    Posts
    101

    Default

    been making good sugar on my kitchen aid pro, but friend has a Hobart I'm gonna start using to do larger batches.
    Interesting you mention keeping going too long with make it finer grain. Mine has been coming out somewhere in the middle between granulated and brown sugar grain, but not one bit clumpy. Id like to get close to that on the Hobart, so I hope it's just as easy. Do you spread out and cool it down? my only fear is it being too warm and sitting in that large of a bowl too long, could make it clump up too much before packaged.

  6. #6
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    4,898

    Default

    I usually have good luck with sugar, but not this year. First batch was very nice and I proceeded to mix too long, very fine, but worked well for cotton candy. Second batch I did not boil to 260. went to cookie dough in the Hobart and finally went to sugar. Had to mix it more and sift it too because it clumped up.
    Regards,
    Chris
    Casbohm Maple and Honey
    600 roadside taps
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors

    www.mapleandhoney.com

  7. #7
    Join Date
    Feb 2018
    Location
    WV
    Posts
    101

    Default

    Quote Originally Posted by Sugarmaker View Post
    I usually have good luck with sugar, but not this year. First batch was very nice and I proceeded to mix too long, very fine, but worked well for cotton candy. Second batch I did not boil to 260. went to cookie dough in the Hobart and finally went to sugar. Had to mix it more and sift it too because it clumped up.
    Regards,
    Chris
    ive done 3 batches so far and 255 seems to be my good number. (water boils at 207 for me) the sugar is slightly fine, but i havent had to sift it at all yet. Hopefully I will have luck with bigger batches on the hobart! It's a 40 or 60qt, so I think I can do 2 gallons at a time.

  8. #8
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    4,898

    Default

    Wow you have a super sized mixer! Post a picture of that bad boy! 40 qt yea you should be able to do 3 gallons or more. I stop severy times and wipe the under side of the head off to limit the moisture dripping back into the sugar.
    Keep boiling!
    Regards,
    Chris
    Casbohm Maple and Honey
    600 roadside taps
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors

    www.mapleandhoney.com

  9. #9
    Join Date
    Feb 2018
    Location
    WV
    Posts
    101

    Default

    IMG_0118.jpg

    my bad! It's only a 20 I think. started with 2 gallons syrup before the boil, and got 13 pounds sugar. Worked very well!
    IMG_0122.jpg

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts