+ Reply to Thread
Results 1 to 3 of 3

Thread: Inlet hole

  1. #1
    Join Date
    Jan 2012
    Location
    MN
    Posts
    375

    Default Inlet hole

    I'm planning on switching out my 1" dry line with 1 1/2" and was wondering if I can use the 1" hole on the releaser for the 1 1/2" line or do I need to make the hole bigger to accommodate the bigger line?

  2. #2
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    10,473

    Default

    You will get better performance with a 1.5" hole. Either plug that 1" hole and drill a new one, or you can even drill using the plug to hole center. Just check the size hole to make for you to thread it, or have the right size to PVC cement a fitting in. Either way will work.
    Dave Klish about 1320 taps in '15, downsized after I lost my help, about 450-500 planned for 2021 (and after?)
    2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
    3x8 raised flue evaporator
    250 GPH converted to electric, RO by Ray Gingerich
    6.32 KW solar system, 1.48KW is battery backed up, all net metered
    http://s1041.photobucket.com/albums/...anssugarhouse/
    website: www.cnymaple.com

  3. #3
    Join Date
    Jan 2012
    Location
    MN
    Posts
    375

    Default

    Will be installing 1 1/2" thread PVC fittings. Thanks maple flats.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts