I have a 450 gallon poly tank that has a 2 inch crack right beside the bulkhead fitting. Who knows how to fix it ???
I have a 450 gallon poly tank that has a 2 inch crack right beside the bulkhead fitting. Who knows how to fix it ???
2 1/2 x 10 with steam away leader drop flue inferno arch.
550 in gravity
I would guess you have a 2" bulk head fitting. Norwesco tanks also utilize 3" and 4" bulkhead fittings and I would think there are bigger ones available. Could you remove the 2" and then make the hole big enough for the 3" or 4" which would "eliminate" the crack?
look for a plastic weld shop. making a bigger hole will be a pain and not end the crack line
Fred Ahrens
330-206-1606
Richards Ohio Maple Equipment
Ohio CDL sales rep
LaPierre Dealer
H&M maple fabricator Dealer
Service Tech/repair for all brands and electronics
don't take life too serious, nobody gets out alive anyways!
Actually as long as the entire crack was eliminated by the new hole you should be fine.
again far better to weld it, the crack has a path that goes much farther than you can see.
Fred Ahrens
330-206-1606
Richards Ohio Maple Equipment
Ohio CDL sales rep
LaPierre Dealer
H&M maple fabricator Dealer
Service Tech/repair for all brands and electronics
don't take life too serious, nobody gets out alive anyways!
If you want to learn how to fix or repair poly tanks yourself and have nobody nearby, just google "poly tank repair". Theres different stuff for sale, and different repair methods.
If you're not familiar, the welding referred to above is not the sparks flying, way bright light, melt metal heat that is metal welding. The only time I've done it I used a heat gun and some melt in the crack poly stuff. You might want to practice on some scrap poly first to see how it works. good luck.
I had a poly tank with a 4 inch slit made by a pallet fork. My son in law welded it with hair dryer and plastic weld ten years ago. Still holding well. Look on youtube for plastic weld info
2 x 6 W F Mason arch, Leader WSE AUF drop flue pans
40 taps 2009-
New 16 x 16 sugar shack 2010
180 taps 2012 -
200 taps 2013 -
220 taps 2014 -
250 taps 2015 -
300 taps 2024
shurflo pump 2016 -
new mainlines and saddles 300 taps 2017-
added Deer Run 125 RO, Lapierre 7 inch filter press and CDL water jacket canning unit in 2019
Bombardier 400
BX 22 Kubota
2024 is our 29th year making the " nectar of the gods"
Just a hobby