Opinions please. Copula over evaporator or full length Copula entire length of ridge? Shack is 12 X 16.
Opinions please. Copula over evaporator or full length Copula entire length of ridge? Shack is 12 X 16.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
Mine is right over the evaporator and about 6' in length +/- an inch or two. It works well to carry everything up and out.
I think if you go too long; you may create a down draft and defeat the whole purpose.
Your going to really like boiling inside.
John Allin
14x18 Hemlock Timber Frame Sugar House 2009
Leader 2x6 w/Patriot Raised Flue Pan 2009
Leader Steam Hood 2014 - Clear Filter Press 2015
Leader Revolution Pan and SS Pre-Heater 2016
CDL Hobby RO & Air Tech L25 Hi Vac Pump 2019
06' Gator HPX to collect wood & sap
14' Ski-Doo Tundra for winter work in the woods
Great Family 3 grown kids+spouses and 7 grand kids who like the woods
7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.
I agree, over the evaporator and about the same square foot opening as the sq. ft of the evaporator, up to maybe 50% more.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
IMG_1635.jpgIMG_1636.jpgIMG_1638.jpg
Didn't get much accomplished this past weekend as even the little things take so much time and all the minutes turn to hours pretty quickly. Squared frame up and anchored, furred out windows and installed them. Next on the docket is bricking Arch area.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
I hate when pictures are sideways.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
What are your plans where you have no concrete? If that is for your evaporator, it should have a good foundation, otherwise it will not stay level as the frost comes out of the ground. Read up on this before you proceed. Or is that where the dog was?
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
IMG_9707.jpg
That's where my firebox goes Dave after I brick that area.
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
OK, that explains it. Thanks for the clarification.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
More memories made this weekend!!IMG_1758.jpgIMG_1754.jpgIMG_1761.jpgIMG_1746.jpgIMG_1766.jpg
1960 - 1970s 70 taps on galvanized buckets with Dad and Grandpa.
1970s - 1985 Acted crazy!
1986 - 2005 20-30 buckets.
2006- 2017 70 buckets and bags
2017-2019 100 bags and buckets
2020 Finally retired!!! 75 buckets, 50-75 on tubing. RO Bucket, New 12 X 16 Shack and a 42X42 flat pan.
2021-Adding another 125 taps along with a second RO bucket.
2022- Shooting for 350 taps, with 100 on lines.
Lots of Family and Friends and dogs named Skyy and Nessy!
Looks good Trapper2. Getting the young ones involved makes it special!
Looking at your pics...might be way too late now, but I am surprised you didn't double up the top plate. I know it's only a small shack and nobody is living in it, but that single 2x top plate laid flat with your rafters placed off center of the wall studs would make me nervous, especially with the heavy snow loads I'm sure you get in Wisconsin.
16x24 Timber Frame Sugar House
Mason 2x4 Evaporator
90 trees on buckets