I pick up a Lapierre releaser 12X12X18X6 It has the float balls in it, would that take the place of a moisture trap?
Thanks Brian
I pick up a Lapierre releaser 12X12X18X6 It has the float balls in it, would that take the place of a moisture trap?
Thanks Brian
Velvet Hollow Sugarworks
Greenwood, Maine
900 taps
CDL 2X6, leader RO
speaking from experience, NO!
Thanks that's what I wanted to know.
Velvet Hollow Sugarworks
Greenwood, Maine
900 taps
CDL 2X6, leader RO
No, the moisture trap goes between the pump and the releaser. Any moisture to get thru the releaser gets stopped before it gets into the vacuum pump, it is to protect the pump.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
This releaser has 4 - 1" threaded holes for the inlet I will have a 1- 1/4" line coming in My plan is to plug the holes and drill and tap out a 1 - 1/4 hole do you see any problem with this? I have the drill and tap.
Thanks Brian
Velvet Hollow Sugarworks
Greenwood, Maine
900 taps
CDL 2X6, leader RO
That should work just fine. I have seen releaser with alot more plugs than that.
Nate Hutchins
Nate & Kate's Maple
2022 1000 taps?
3x10 Intensofire
20x36 sugarhouse
CDL 600gph RO
A wife and 2 kids.
Thanks that's was my thinking!
Velvet Hollow Sugarworks
Greenwood, Maine
900 taps
CDL 2X6, leader RO
Sounds like a plan!
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Lapierre releaser 12X12X18X6 look at the photo it doesn't have a o-ring seal just pipe in to a pvc fitting I got this used.RELEASER.jpg
Velvet Hollow Sugarworks
Greenwood, Maine
900 taps
CDL 2X6, leader RO
Do I glue up the pipe? Or is this the way it's made?
Thanks Brian
Velvet Hollow Sugarworks
Greenwood, Maine
900 taps
CDL 2X6, leader RO