Does anyone know what the thickness is of the stainless steel sheet that is commonly used on arch sides.
Thickness of stainless arch sides
Does anyone know what the thickness is of the stainless steel sheet that is commonly used on arch sides.
Clay Stroup
Stroup's Sugar Bush
Almont, MI
2016: 20 taps, 2 gallons
2017: 80 taps, 12 gallons
2018: 92 taps, 16 gallons
2019: 110 taps, 34 gallons
2020: 140 taps, 31-1/2 gallons
2021: 155 taps, 32 gallons
2022: 190 taps, 29-1/2 gallons
2023: 200 taps, 42 gallons
Leader WSE 2x6 drop flue
Mason Steam Pan finishing set up
D & G 7" Filter Press
Next Gen 180 HPRO RO
John Deere Gator 4 x 2
12 x 18 Sugar Shack built in 2019
Thin enough so that is is easy to work with and thick enough to support your brick. I was fortunate so salvage the stainless for my arch build but it was on the thick side (around 10 ga) and a pain to bolt onto the arch frame. I never used so many drill bits on one project in my life.
Camp Wokanda
Peoria Park District
2023 - 210 on 3/16 shurflo, sap storage shack w/ 1100 gallon tank - 123 gallons
2022 - 210 on 3/16 shurflo, homemade vac filter & water jacket canner - 104 gallons
2021 - 215 on 3/16 shurflo, added 2nd membrane to RO - 78 gallons
2020 - 210 on 3/16 shurflo, upgraded hp pump on RO - 66 gallons
2019 - 150 on 3/16 shurflo, Deer Run 125 dolly RO - 73 gallons
2018 - 120 on 3/16 shurflo, 2x6 raised flue w/hood, homemade arch w/ AUF & AOF - 34.5 gallons
I think most are 20 ga SS. To drill SS use a cobalt bit, it works best for SS. You should get several holes, if not all of them on one bit.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I talked with leader via email and they told me ( all 2' wide arches get 22 gauge anything bigger get 20 gauge ) . And yes , cobalt drills work best . Starting with a smaller pilot hole first makes them stay sharp longer . And having a ( drill doctor ) is real handy to have .
Posting Permissions
Reply With Quote