you could powdercoat the bolts but not the threaded areas as long as they are not a super tight fit thru the plates as the powdercoating will add a certain amount of thickness to them.
you could powdercoat the bolts but not the threaded areas as long as they are not a super tight fit thru the plates as the powdercoating will add a certain amount of thickness to them.
Clay Stroup
Stroup's Sugar Bush
Almont, MI
2016: 20 taps, 2 gallons
2017: 80 taps, 12 gallons
2018: 92 taps, 16 gallons
2019: 110 taps, 34 gallons
2020: 140 taps, 31-1/2 gallons
2021: 155 taps, 32 gallons
2022: 190 taps, 29-1/2 gallons
2023: 200 taps, 42 gallons
Leader WSE 2x6 drop flue
Mason Steam Pan finishing set up
D & G 7" Filter Press
Next Gen 180 HPRO RO
John Deere Gator 4 x 2
12 x 18 Sugar Shack built in 2019
Just get some stainless bolts.
Sent from my iPhone using Tapatalk
Clean the threads with a wire brush and use mineral oil to keep them from rusting again.
Russ
"Red Roof Maples" Where the term "boiling soda" was first introduced to the maple world!
1930 Ford Model AA Doodlebug tractor
A couple of Honda 4 wheelers
Four chainsaws and no chickens!
You could spray it down with food grade silicon. That should keep it from rusting.
Nate Hutchins
Nate & Kate's Maple
2022 1000 taps?
3x10 Intensofire
20x36 sugarhouse
CDL 600gph RO
A wife and 2 kids.
I’m gonna get the bottom frame and the wing nuts powder coated. Plate bolts I’m just going to use pure mineral oil on.
Thanks for the ideas.
600 taps on vacuum
Lapierre mechanical Releaser
CDL electric releaser
2.5 x 10 CDL Venturi ( new for the 2024 season )
Home made modulating auto draw off
Homemade RO 2 x 4" membranes
CDL 16 x 16 bottler
Wesfab 7" filter press
Delaval 73 vacuum pumps
12 hives of bees