I ran preservative through my ro. Should I drain it or just let it be like it is.
I ran preservative through my ro. Should I drain it or just let it be like it is.
Don't drain it, you don't want to let the membrane dry out.
Russ
"Red Roof Maples" Where the term "boiling soda" was first introduced to the maple world!
1930 Ford Model AA Doodlebug tractor
A couple of Honda 4 wheelers
Four chainsaws and no chickens!
What kind of preservative are you using for storing in the machine? Thanks.
I don't know what KReinisch uses but I use Leader's membrane preservative. I just close the needle valves to hold it in the membranes, and I rinse out the wash tank. Then keep the RO from freezing.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
It's generally a 1 weight % solution of sodium metabisulfite in water.
Leader 1/2 pint - Kawasaki Mule - Smoky Lake Filter Bottler
24 GPH RO, 2 1/2 x 40 NF3 (NF270), 140 GPH (Brass with no relief valve ) ProCon pump
2013 - 44 taps - 16 gallons syrup, 2014 - 109 taps - 26 gallons syrup
2015 - 71 taps - 13.5 gallons syrup, 2016 - 125 taps - 24.25 gallons syrup
2017 - 129 taps - 17.5 gallons syrup, 2018 - 128 taps- 18 gallons syrup
2019 -130 taps - 18.5 gallons syrup, 2020 ~125 taps-19.75 gallons syrup
I use a solution that calls for 1 cup of solutions for 5 gallons of water. So I mixed up 10 gallons and let it circulate through the ro for a bit.