Good point mol1jb, I ran into an issue when I ordered a new set of pans. The original ones were Leader and I just ordered based on what Leader's labels said they were. The originals were marked 3'x2' syrup pan ans 3'x6' flue pan. I changed the ratios and ordered 3'x3' syrup and a 3'x5' flue pan from Thor. When I went to put them on my arch, my new pans were 1.5" too long, even with the gasket between them 1/4" instead of 1" on the originals. I then measured the new ones, they were on exactly. I could not measure the old leader pans because I had already sold them. I then had to lengthen the arch 2" to make the new pans fit. Leader does not label their pans at actual size they round up (a lot).
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Reply With Quote