Originally Posted by
Lanark
Can I use a RO system that is made for under the sink tap water? If not, what is the difference?
The big difference is that they are set up opposite and are likely too small even for your size operation.
The under sink units throw out the concentrate and keep the permeate, the opposite of what we need and most are real small, rated in gallons per day (24 hrs non stop).
While one could help a little, you will be far better off buying or making one for maple.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.