Good day.

I have followed some of the threads here and built my own 4" by 40". I have a Procon 240 gph high pressure pump that is fed by a 14 gpm jet pump. I have a 1 gpm flowmeter on my concentrate line and a 2 gpm flowmeter on my permeate line. When I test it with pure water, I seem to exceed my flowmeters. It appears that I am able to process about 5 gpm. Should I expect this to slow down with raw sap? I am able to achieve 250 psi on the discharge side of my membrane. I understand the math on the 240 gph results in a 4 gpm production - so I may have answered my own question. But thought I would reach out to see what other folks running a 4" by 40" achieve.

Thank you.IMG_5498.jpg