Ran my Sp-22 overnight as a test. Yesterday it was pulling 23 inches. Today 0... where do I start diagnosing?
Sp-22 HELP!
Ran my Sp-22 overnight as a test. Yesterday it was pulling 23 inches. Today 0... where do I start diagnosing?
Remember to keep on ticking while the sap is dripping.
2016- 50 buckets. Made 4 gallons.
2022- 3750 taps + Smartrek! Made 1300 gallons.
2023- 3750 taps after removing a pump house and connected two woods. Made 800 gallons.
What oil do you have in it and do you have any way to know if it got real hot?
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Thanks for replying mapleflats, I worked on it yesterday and it turns out that it somehow started turning backwards????? How does that even happen?
Remember to keep on ticking while the sap is dripping.
2016- 50 buckets. Made 4 gallons.
2022- 3750 taps + Smartrek! Made 1300 gallons.
2023- 3750 taps after removing a pump house and connected two woods. Made 800 gallons.
Ultimatetreehugger did you somehow reverse polarity on your motor?
There should be a tag showing the wiring schematic to indicate which wires to connect for proper rotation. Are you sure the power supply didn't get wired backwards? It's possible the wires got crossed on the supply which might have created the problem.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
anyone have leads on replacement parts for these sp-22s? just had one of mine lose vacuum
Matthew Cross
Madison, Ohio
400 taps on vacuum with surge sp-22
200 buckets
30 x 10 leader max
w/ enhanced steam away and Pre-heater
Hamby Dairy supply.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I have 3 for parts
2x6 RAISED FLUE PANS
by WF MASON
650 taps on vac.
100 on bags
Posting Permissions
Reply With Quote