+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Hose Recommendations

  1. #1
    Join Date
    Jan 2008
    Location
    Hopkinton, MA
    Posts
    1,787

    Default Hose Recommendations

    With the amount of time I'm putting in to washing tanks, barrels, etc. - in freezing temps, after dark, and in a bad mood, I'm ready to invest in a better hose. There are so many out there that claim to be the greatest anti-kink technology, durable, best for cold weather or hot water, I don't know what to believe.

    Basically, I want something that's flexible in cold weather, doesn't have a memory, rolls up easily, and has fittings that can withstand some abuse. Am I on the right track looking at rubber hose and brass fittings? What about these octagon-shaped hoses? What's that about?

    If you love your hose, I'd love your input.

    Thanks,
    Sean
    Woodville Maples
    www.woodvillemaples.com
    www.facebook.com/woodvillemaples
    Around 300 taps on tubing, 25+ on buckets if I put them out
    Mix of natural and mechanical vac, S3 Controller from Mountain Maple
    2x6 W.F. Mason with Phaneuf pans
    Deer Run 250 RO
    Ford F350
    6+ hives of bees (if they make it through the winters)
    Keeping the day job until I can start living the dream.

  2. #2
    Join Date
    Mar 2011
    Location
    Mid-coast Maine
    Posts
    79

    Default

    I swear by Craftsman hoses,idk if they’re still selling them due to the limbo of Sears and the Craftsman brand being sold off.

  3. #3
    Join Date
    Mar 2011
    Location
    Greenwood, Me
    Posts
    974

    Default

    craftsman rubber hose
    2024 - New Maine resident, 12X12 sugar shack under construction
    2019 - New 12X12 boiling pavilion
    2018 - New Mason 2X3 Hobby XL and homemade RO

  4. #4
    Join Date
    Jan 2017
    Location
    Quaker Hill, CT
    Posts
    328

    Default

    Yep the old rubber hose is best for cold weather and having little memory. They tend to leave marks on things that the hose rubs up against but not always.

    Amazon has a selection of them.
    2017 25 taps on buckets got me hooked 1 gallon of sweet
    2018 51 taps on 3/16 tubing/ DIY oil tank evaporator 8.5gallons finished
    2019 60 taps 7 gallons finished ended season short
    2020 New 2x4 divided pan ready to get away from the headache that is steam table pans
    2021 off year due to pandemic and projects
    2022 back at it

  5. #5
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,565

    Default

    I only use potable water hose, I never want to introduce any of the things that are in those other hoses into my equipment. Non potable water hoses can be made of any recycled materials that can contain lead or even poisons from in recycled materials.
    I rarely kink a hose, you just need to develop a system when moving them to prevent kinking and take a little time to check as you pull the hose around. Also, I do not use the potable water hoses from Walmart, they are too flimsy. Find a better quality one, costlier, but from an RV dealer. The hose will be higher quality.
    Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  6. #6
    Join Date
    Mar 2008
    Location
    Lake County Ohio
    Posts
    1,630

    Default

    I'm with Dave on this one and use a hose that's NSF-61 rated. Armadillo hose is rated for both cold and hot water...most RV hose is just cold water rated. It also has a very tough outer jacket and, I believe, stainless fittings.
    The downside is that it's Not user friendly when cold. When cleaning up; I run it about 80' from the shop to the sugar house, if it's been laying in the snow, it's like coiling up a piece of re-bar. Running some hot water through it softens it right up though. It's not cheap, but it's not leaching anything into my syrup either. I use the Marine Hose.

    http://armadillohose.com/
    John Allin

    14x18 Hemlock Timber Frame Sugar House 2009
    Leader 2x6 w/Patriot Raised Flue Pan 2009
    Leader Steam Hood 2014 - Clear Filter Press 2015
    Leader Revolution Pan and SS Pre-Heater 2016
    CDL Hobby RO & Air Tech L25 Hi Vac Pump 2019
    06' Gator HPX to collect wood & sap
    14' Ski-Doo Tundra for winter work in the woods
    Great Family 3 grown kids+spouses and 7 grand kids who like the woods
    7th Gen Born in Canada - Raised in Chardon Ohio - Maple Capital of the World..<grin>.

  7. #7
    Join Date
    Jan 2008
    Location
    Hopkinton, MA
    Posts
    1,787

    Default

    Thanks for the input - although "...like coiling up a piece of re-bar," is definitely a dealbreaker!
    Woodville Maples
    www.woodvillemaples.com
    www.facebook.com/woodvillemaples
    Around 300 taps on tubing, 25+ on buckets if I put them out
    Mix of natural and mechanical vac, S3 Controller from Mountain Maple
    2x6 W.F. Mason with Phaneuf pans
    Deer Run 250 RO
    Ford F350
    6+ hives of bees (if they make it through the winters)
    Keeping the day job until I can start living the dream.

  8. #8
    Join Date
    Feb 2016
    Location
    Center Harbor, NH
    Posts
    38

    Default

    Flexilla hose is the best potable water hose I have used. It remains completely flexible in cold weather (unlike that white potable water hose) and has very well made end connections. It is available in various lengths from 3ft to 100 ft.
    https://www.amazon.com/Flexzilla-HFZ...dp/B003TFE7ZM/

  9. #9
    Join Date
    Jan 2008
    Location
    Hopkinton, MA
    Posts
    1,787

    Default

    Thanks for sharing that link. I had seen the Flexilla, but hadn't noticed it could do potable water. Was hoping to avoid the aluminum fittings because sooner or later I ding up the male threads. They call it durable aircraft aluminum, so maybe that makes a difference?
    Woodville Maples
    www.woodvillemaples.com
    www.facebook.com/woodvillemaples
    Around 300 taps on tubing, 25+ on buckets if I put them out
    Mix of natural and mechanical vac, S3 Controller from Mountain Maple
    2x6 W.F. Mason with Phaneuf pans
    Deer Run 250 RO
    Ford F350
    6+ hives of bees (if they make it through the winters)
    Keeping the day job until I can start living the dream.

  10. #10
    Join Date
    Mar 2009
    Location
    Greenwood, Maine
    Posts
    466

    Default

    Yes but the reviews aren't very good on that hose.
    Velvet Hollow Sugarworks
    Greenwood, Maine
    900 taps
    CDL 2X6, leader RO

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts