Your Kidding Right???
If you need a laugh take a look at this on Craigslist.....
https://vermont.craigslist.org/grd/d...804447439.html
Needs some "re tinning" all for just $300 Good deal for someone who's handy and had a recent tetanus shot.
00707_70u3Hr46awu_1200x900.jpg00Q0Q_iNfx3jfJQi7_1200x900.jpg
That should shine up nice with a little elbow grease. lol
Noel Good
1998 to 2009: 15 taps on buckets, scavenged fire pit and pans
2010: New 2x4 SS flat pan w/preheater
2015: New to me Lapierre 18x60 raised flue, new shack, new everything!! 59 taps 23.75 gallons
2016: 85 taps 19 gallons
2017: Purchased 2.5 acres and tubed half with 3/16. 145 taps total 49.25 gallons
2018: 200 taps (162 on 3/16ths 38 on buckets) New NextGen RO 63 gallons
2019: 210 taps 73.5 gallons
2023: 210 taps 89.75 gallons
www.wnybass.com
It will buff out.
backyard hobbyist
Mason 2x3 w/AUF
2020 - added small vacuum and gravity 5/16 tubing and sap sacks
N 42* 18' 31."
W 79* 34' 15."
https://www.saptapapps.com/map/31868...-aab748a6394e/
They might actually get someone to buy it. Would be OK for someone looking to build their own arch, many of the cast parts would take a lot to make the same part.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Its been for sale for months....
60ish taps on buckets
D&G Sportsman 18x63
Turbo RB15 RO Bucket
Haha, nice weekend project! It's beautiful
18x30 sugarshack
5100 taps high vac
3x10 inferno with steampan
7'' wes fab filter press
10'' cdl air filter press
D&G 3 post reverse osmosis w/recirculation
Hell there are TWO huge old cast-iron Grimms in the sugar shack across the road from me...they would take a helluvalot of lovin to get back into service. Not to mention all the tubing, collection tanks, yada yada...shouldn't cost more than a million or so to fix up ;-)
Been tapping since 2008.
2018 - 17 taps/7 trees...819l sap, approx 28l syrup
2019 - 18 taps/8 trees...585l sap, 28l syrup...21:1 ratio
2020 - 18 taps/8 trees...890.04l sap...gave away about 170l, 30l snafu'd....23l total for me from approx 690l
2021 - 18 taps/8 trees...395l sap, 12 l syrup
2022 - 18 taps/8 trees....7 sugars 1 red due to #2 having surgery so had the season off....582l sap, 18.5l syrup
2023 - 18 taps/8 trees...all sugars again. 807l sap, so far approx 14l syrup
At least he was honest about the retinning. He just left out the re-angle ironing, regrating, reinsulating and rebricking part. Minor details...
2014 Upgrades!: 24x40 sugarhouse & 30"x10' Lapierre welded pans, wood fired w/ forced draft, homemade hood & preheater
400 taps- half on gravity 5/16, half on gravity 3/16
Airablo R.O. machine - in the house basement!
Ford F-350 4x4 sap gatherer
An assortment of barrels, cage tanks & bulk tanks- with one operational for cooling/holding concentrate
And a few puzzled neighbors...
http://s606.photobucket.com/albums/t...uckethead1920/
I sold my old Algier 2x6 arch last year for $250 and I had a lot of interest in it. The arch had a crack that went from the right door up to the pan and it even cracked the angle iron behind the arch front. If that arch were smaller I think it might have sold by now.
Russ
"Red Roof Maples" Where the term "boiling soda" was first introduced to the maple world!
1930 Ford Model AA Doodlebug tractor
A couple of Honda 4 wheelers
Four chainsaws and no chickens!
If it includes the doors, the top rail and the grates then it's not that bad of price. Otherwise, it won't buff out ;-)
Dave Barker
2014 30 taps, steam tray pans
2015 ~100 taps, in conjunction with University of Louisville
2x5 Smoky Lake hybrid pan
2022 150 taps
Posting Permissions
Reply With Quote