A few questions, after talking with SL.
Tell us about the auto draw, did you make it?
Was it a SL auto draw or just the valve?
If it was a homemade auto draw using the SL valve, what voltage did you send to it?
I was told you made the auto draw and sent 120V to a 12v valve, is that correct?
All that being said, SL told me they will warranty the valve. You need to call them.
Do not complain about a product if you used it the wrong way, a 12V valve should only have 12V sent to it.
If the info I was given is incorrect, please correct it in a PM to me with details
Dave Klish, moderator
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.