+ Reply to Thread
Results 1 to 6 of 6

Thread: 5/16 spiles for buckets

  1. #1
    Join Date
    Feb 2011
    Location
    Weare
    Posts
    102

    Default 5/16 spiles for buckets

    Id like to try some. 5/16 spouts this year. Abscond has some plastic with hooks, but I dont see those holding up well. They also have some stainless (no hook) but they say they wont work with flat top buckets. I have a mix.

    Suggestions?
    Now up to 37 taps all buckets
    2x4 evaporator with flat pan

  2. #2
    Join Date
    Feb 2017
    Location
    Richmond NH
    Posts
    152

    Default

    The plastic ones are usually seasonal, so you would buy new ones each year. If you want metal I think all your good options are still in 7/16. You can Try looking for some good used stainless ones. If you really want to do 5/16 just grab some plastic ones and toss them after the season. They are pretty cheap.
    smoky lake 2x4 hybrid pan on homemade arch. 60 taps on shurflo

  3. #3
    Join Date
    Feb 2011
    Location
    Landisburg, PA
    Posts
    231

    Default

    I switched from 7/16 to Sap-Meister 5/16. I tried the plastic 5/16 and they did not work for me. They leaked and would come loose. I bought the hooked spouts and use a 19/64 drill bit to tap the tree. The one complaint I have with them is the hook they use. The hook they use is a little smaller then the hook that my 7/16 used and my buckets did not sit as well on them so I just switched out the hooks with my old hooks and they work much better.
    2011 - 6 buckets
    Stove Top
    2012 - 15 buckets
    2013 - 19 buckets
    Camper cook stove with 3 high propane burners
    Custom made 42x14x7 maple pan with dividers
    2015 - New 12x16 Sugar Shack
    2015 - New Lapierre Propane Evaporator
    2016 - 28 buckets
    2017 - 30 buckets

    .

  4. #4
    Join Date
    Mar 2011
    Location
    Potsdam in far northern New York
    Posts
    653

    Default

    I'm very happy with the latest Sapmeister spouts. Their design has evolved over the last few years and now they really work well. I love stainless steel. It doesn't wear out. It doesn't degrade in the sunlight, and it can be cleaned. My spouts are as clean as surgical instruments at the beginning of every season. Now if we could get someone to make a reasonable stainless bucket...

  5. #5
    Join Date
    Jan 2015
    Location
    Waucedah, MI
    Posts
    15

    Default Cdl 5/16

    i have been gradually switching over from buckets to bags and 7/16 spouts to 5/16. The only complaint i have about the CDL spouts is that i have broken a couple when tapping them into the tree. They are definitely not as stout as the 7/16's and when it's cold you need to be aware and use a lil more finesse.
    mark

  6. #6
    Join Date
    Feb 2011
    Location
    Weare
    Posts
    102

    Default

    Thanks all –*I saw some older messages complaining about the design of the sapmeister spiles. Spoke with someone from the company and they said they were modified a while ago. I ordered a bunch and will report back.
    Now up to 37 taps all buckets
    2x4 evaporator with flat pan

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts