Thompson, just send a link to me and I'll post it. Or if you want, when you get it, simply highlight the full address bar at the top of the page, hold down the "control" key and the letter C at the same time, then put it into a post on here and hold "control" down and the letter V at the same time and it will be in your post as a link anyone can click on to open.
Or you can highlight the full address bar, right click on it and chose "copy" then in a post on here, right click (on your mouse), and chose Paste. Either way will work.
Last edited by maple flats; 12-08-2018 at 08:38 AM.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.