Originally Posted by
maple flats
When you build new, do not have the angles point up, you want the points down, they then fill up with ash which is what protects them from the intense heat. I hope that is what you meant. If you have the points up the ash will try to plug the spaces between them that you need for air flow and they will soon sag. While I did not make them, my grates are factory and they look like angle iron in shape with the points down to fill with ash. They are still perfect and the arch is from 2001. I forget now, the grates are in sections and I think the sections are as if they are 3 V's each, V pointed down and an air space between each, but they are cast.
That is what I meant... Worded it wrong. The open side up, point down.
Jake
smoky lake 2x6 drop flue SSR on homemade arch
235 taps on 2 gast 1550s and lappiere releasers
24x12 sugar house
2019 Kubota L2501 work horse