Here's a link https://www.auctionzip.com/Listings/3124611.html
Here's a link https://www.auctionzip.com/Listings/3124611.html
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Who went to Ray's auction? Get any goodies, big or small?
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Got a 500 gallon bulk tank for $500. Sold my 1600 gallon round bottom tank for $1650 and 3 40 gallon barrels for $155 each. Not as much stuff there overall this year but what was there was good. In years past there would be rows of junk. That wasn't the case this year. Four long rows of pretty good equipment.
1000 taps on vac down to 100+ buckets 99% sugars
2x5 SL Hi-Output Raised Flue Corsair evaporator
SL Short bank press with CDL diaphragm pump
Leader Micro 1 RO for 2024
Constantly changing
2010:36 gal 2011:126 gal 2012:81 gal 2013:248 gal 2014: 329.5 gal 2015:305 gal 2016:316 gal 2017:258 gal 2018:147 gal 2019:91 gal 2020:30 gal 2021:30 gal 2023:50 gal Total since 2010: 2047.5 gal
Tapping the same trees my great, great and great grandfathers tapped.
Its was a great day for sellers. Like new prices for well used stuff. Some things went for new price. Very nice day, no rain for a change. People get carried away at auctions but that's ok, it keeps the economy moving
Fred Ahrens
330-206-1606
Richards Ohio Maple Equipment
Ohio CDL sales rep
LaPierre Dealer
H&M maple fabricator Dealer
Service Tech/repair for all brands and electronics
don't take life too serious, nobody gets out alive anyways!
So I bought one of his 250 models last year. Was cleaning it today and found one of the high pressure hose ends broken. I tried calling Rays number on here and got some recording for some school resource officer? Is the right number for Ray? Or does anyone know where I can purchase another hose like his?
Last edited by Waynehere; 11-03-2018 at 01:09 PM.
220 Taps
2x6 Home made
Sap Shack 20x20
5 Shurflo diaphragm pumps
250 GPH Deer run RO
Rays number should be 440-422-3047
Home of the machined 5 X 5 Hand Filter Presses Made in the USA
Chairman of Lake Erie Maple Expo
Dealer for DSD Stars, MemProTec RO'S, SUNRISE METAL SHOP, Bosworth Pumps
Becker Vacuum Pumps
Yep, called them 2x and got a machine from some officer at a school I think.. Not sure if lines are crossed or it belongs to someone else now? Weird.
220 Taps
2x6 Home made
Sap Shack 20x20
5 Shurflo diaphragm pumps
250 GPH Deer run RO
That's his number. You must have misdialed
Fred Ahrens
330-206-1606
Richards Ohio Maple Equipment
Ohio CDL sales rep
LaPierre Dealer
H&M maple fabricator Dealer
Service Tech/repair for all brands and electronics
don't take life too serious, nobody gets out alive anyways!
Well, just dialed it again. Same person. Then I tried my landline and wrong number again... Can anyone verify this for me? Maybe something is wrong calling from NY? I triple checked the number.....
220 Taps
2x6 Home made
Sap Shack 20x20
5 Shurflo diaphragm pumps
250 GPH Deer run RO
You can most likely find all or the fittings at your local hardware store. I've had to replace a couple on my 250 over the years as well
Leader 3x8 Patriot raised flue
800 taps on vacuum
100 buckets around the yard
A lot of help to make it fun