We did what you want to do snowman. It was on a 5x14 with an automatic draw off valve at the pan with a long pipe to the draw off tank. Wasn't really all that difficult to use. We did it because of space restrictions. Only had to squeeze into the tight side of the evaporator once in awhile to check on density. Made life a lot easier. BUT, we now have a revolution pan, and that's the cats meow for one sided drawoffs.
shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
CDL 20+ RO
Double 10"filterpress
sp-11, bb2, airtech L63, L160, L230 vac pumps
CDL low profile electric releaser
MES 8000 electric releaser
CDL 4000 tap mechanical releaser