What is best place to get one built that is quality made, thinking just a flat pan for now...
Used a 55 gallon burner last two years, starting to build my oil tank evaporator today!!!
Any info on custom ss pan manufacturer appreciated
What is best place to get one built that is quality made, thinking just a flat pan for now...
Used a 55 gallon burner last two years, starting to build my oil tank evaporator today!!!
Any info on custom ss pan manufacturer appreciated
You may have somebody closer to you but I would have W.F.Mason build it if I were going to have a custom pan made.
Russ
"Red Roof Maples" Where the term "boiling soda" was first introduced to the maple world!
1930 Ford Model AA Doodlebug tractor
A couple of Honda 4 wheelers
Four chainsaws and no chickens!
How can I contact wf Mason?
Since you are just starting, I would size it to 2'x4' or 30"x4' , which will be far easier to sell when the time comes. Get a price on having dividers too, you will like it far better.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
IMG_20180813_102925432.jpg
This is where it's at so far, got auf pipe in today and ramp attached onto angle iron I welded inside a couple days ago...more pictures to come!