Put this together last weekend, works great with water, no drips, will get the real test tomorrow 20180522_173407.jpg20180522_173345.jpg20180522_173322.jpg
Put this together last weekend, works great with water, no drips, will get the real test tomorrow 20180522_173407.jpg20180522_173345.jpg20180522_173322.jpg
A&A 2x8 raised flue with hoods and preheater, converted to oil with carlin 201 for 2021
8x12 kitchen
8x12 canning room
H20 7.5 1200 Econox for 2018 added 2nd membrane for 2020
H2O 10" filter press half bank
H2O 2430 gallon storage tank
700+ 5/16 on vacuum, 1000+ on 3/16
What are you using to shut the valve on and off with?
shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
CDL 20+ RO
Double 10"filterpress
sp-11, bb2, airtech L63, L160, L230 vac pumps
CDL low profile electric releaser
MES 8000 electric releaser
CDL 4000 tap mechanical releaser
Windy Acres, that is genius. I never thought of a foot actuator switch. You have both hands free to hold the bottles and screw on the lids. Genius.
Let us know how well it works.
Matt,
Minehart Gap Maple
I got the idea from looking at another producers bottling valve that they had purchased many years ago, I think the foot pedal will make things nice
A&A 2x8 raised flue with hoods and preheater, converted to oil with carlin 201 for 2021
8x12 kitchen
8x12 canning room
H20 7.5 1200 Econox for 2018 added 2nd membrane for 2020
H2O 10" filter press half bank
H2O 2430 gallon storage tank
700+ 5/16 on vacuum, 1000+ on 3/16
Well I feel stupid. I didn't notice the foot switch in the picture.
shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
CDL 20+ RO
Double 10"filterpress
sp-11, bb2, airtech L63, L160, L230 vac pumps
CDL low profile electric releaser
MES 8000 electric releaser
CDL 4000 tap mechanical releaser
Donot feel bad lew, I almost didnt put the foot pedal in the post lol
A&A 2x8 raised flue with hoods and preheater, converted to oil with carlin 201 for 2021
8x12 kitchen
8x12 canning room
H20 7.5 1200 Econox for 2018 added 2nd membrane for 2020
H2O 10" filter press half bank
H2O 2430 gallon storage tank
700+ 5/16 on vacuum, 1000+ on 3/16
Just bottled up 18 gallons worth, it worked flawlessly! Not a drop!
A&A 2x8 raised flue with hoods and preheater, converted to oil with carlin 201 for 2021
8x12 kitchen
8x12 canning room
H20 7.5 1200 Econox for 2018 added 2nd membrane for 2020
H2O 10" filter press half bank
H2O 2430 gallon storage tank
700+ 5/16 on vacuum, 1000+ on 3/16
I have one made by The Maple Guys, bought it about 10 yrs ago. I had no issues until this year when I started to get very slow drips. I'll pull it apart soon, there must be a damaged O ring or other seal causing it.
You will really like using one, very simple and effective. Mine came with 3 interchangeable spouts for different size containers. Directions said to use smaller spouts for small containers and larger for bigger ones to avoid foaming in the container. After the first year I just left the largest one in and I simply adjust the flow with a ball valve ahead of the electric valve, much faster to get the proper flow.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Did you buy this as a complete unit or did you gather parts and put it together? Looks like a good idea.
I bought all the parts and put it together
A&A 2x8 raised flue with hoods and preheater, converted to oil with carlin 201 for 2021
8x12 kitchen
8x12 canning room
H20 7.5 1200 Econox for 2018 added 2nd membrane for 2020
H2O 10" filter press half bank
H2O 2430 gallon storage tank
700+ 5/16 on vacuum, 1000+ on 3/16