Thinking of changing over a patriot syrup pan to a revolution pan. For the people with the revolution pan what are your thoughts? I like the idea of one draw off spot and the syrup channel being hotter.
Revolution pans
Thinking of changing over a patriot syrup pan to a revolution pan. For the people with the revolution pan what are your thoughts? I like the idea of one draw off spot and the syrup channel being hotter.
CDL 2.5*8 Venturi with all the bells
Leader Clear 5 bank filter press
Memprotec 350H RO
600ish taps and looking for more.
I love mine. We've made over 3,000 gallons of syrup on a 5x6 revolution pan and have only taken it off the rig once to clean it. It didn't need it but we did it any ways.
shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
CDL 20+ RO
Double 10"filterpress
sp-11, bb2, airtech L63, L160, L230 vac pumps
CDL low profile electric releaser
MES 8000 electric releaser
CDL 4000 tap mechanical releaser
I love mine. Being able to draw off at the same location was big on my list. Swapping is pretty simple. I would go the same way again in a heart beat.
We used one at UVM PMRC for 10 yrs or more. Was a very nice change from switching sides and the process to do that was straight-forward. Rather simple setup. Never had any issues with it.
Dr. Tim Perkins
UVM Proctor Maple Research Ctr
http://www.uvm.edu/~pmrc
https://mapleresearch.org
Timothy.Perkins@uvm.edu
A great invention by Leader,I can reverse the flow faster than you could put a pair of mitts on to switch a pan
7th generation maple producer in sugarhouse built in 1892
2x World Champion Maple Syrup Producer
1250 taps on cv adapters
Leader Vortex 3x14 with Max Flue and Revolution Syrup Pan,Enhanced Steam Away
www.leggettmaplesyrup.com
Posting Permissions
Reply With Quote
