HowardR,

This is my first year with tubing for about 70 taps on 7-8 lines mostly 5/16, and a little 3/16. I’ve been readin up here on cleaning and sanatizing the tubing and purchased a drill pump for this but can’t get it to pump any fluid out of my 5-gallon bucket into the tubing. Im using a Dewalt 18v cordless and notnsure it’s spinning fast enough. It only moves an inch or two (in the tubing) of my water Star San solution. Called the vendor and they said this drill pump isn’t capable for this. Well I didn’t pay much for it, but it sounded like others here had success with theirs, so I’m still trying. Next step is try my electric corded drill as I think it spins faster. I’m using a similar setup with 5/8 hose into my bucket and the other end screwed into the pump inlet. The outlet has fittings bringing it down to 5/16 or 3/16. Appreciate any thoughts. I also have a larger gas powered pump 1,300 Gph for sap transfer but I’m afraid it would be too powerful.