In NY state, if you are advertised as a stop on the association web site you are expected to boil, water if necessary. I've had to do it in the past. Even if you drain both pans and set it aside and fill your head tank with water or permeate to boil, you will still get the aroma and atmosphere and the pans will get cleaned. Run the fire at less than half or 1/3 force, and it will be fine. When you add wood, only fill it about 1/4 maybe less full and add wood about every 30 minutes.
Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Posting Permissions
Reply With Quote