Looking for recommendation on a gas power vacuum pump and releasor .
400 or 450 Taps on 800 ft of 1 inch main line with 3/16 laterals on very little slope .
Thank you
Looking for recommendation on a gas power vacuum pump and releasor .
400 or 450 Taps on 800 ft of 1 inch main line with 3/16 laterals on very little slope .
Thank you
https://www.facebook.com/Hollow-Poin...3009137645393/
4th year 2018
new sugar house 21x36 fully insulated and heated
600 on 3/16 pipe
new r/o
new filter press
new auto draw off
3rd year 2017
150 on 3/16 pipe
300 on buckets
second year 2016
325 taps on buckets
new 900 polaris sap hauler on tracks
first year 2015
400 acres
150 taps on buckets
new CDL Hobby special
12 x 20 sugar sack
Argo Sap hauler
looking to have fun!
Your set-up sounds very similar to mine. I actually have probably closer to 2000' of 1" main, and have about 440 taps. I run a 6.5hp predator gas motor (which I'm in the process of switching over to a 2hp elec. motor), and a gast 1550 vac pump. I have a benard double barrel releaser that I picked up used. Its bigger then I need, think its rated for around 2000-3000 taps. Eventhough its rated for more then I have on a good run it'll still dump once every 60-90sec. This set-up for me is pulling around 25" of vac.
I run 4 alamos with Honda engines. Work great.
We had an old Alamo dairy pump and an Indiana gas powered. Drew the sap from our far back sugarbush across pur pasture to the sap house. No problem