+ Reply to Thread
Results 1 to 8 of 8

Thread: Maple volcano

  1. #1
    Join Date
    Jan 2016
    Location
    MA
    Posts
    589

    Default Maple volcano

    I was making granulated sugar with the light syrup I produced today. After boiling it down I had poured it into the mixer and started mixing when a minute later the whole thing started foaming over the lip of the bowl and all over the counter. I know that the crystallization process releases heat but I was surprised at the voracity of it. Nobody got burned and most of it was saved. Has this happened to anybody else?

  2. #2
    Join Date
    Apr 2014
    Location
    Wakefield,New Hampshire
    Posts
    505

    Default

    This is why I'm still a little hesitant to try making maple candy or granulated sugar. Hope you didn't waste too much syrup with the mishap.
    6th season solo sugar maker in a young sugar bush of mostly red maples
    320 taps
    2x6 self built arch, Flat pans w/ dividers
    New 12x16 sugar house
    CDL hobby 250 RO

  3. #3
    Join Date
    Nov 2005
    Location
    smithville flats ny near binghamton
    Posts
    600

    Default

    Yes. All the time. And from my experience, the lower the invert sugar the more "volcanic" it will be.
    shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
    5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
    CDL 20+ RO
    Double 10"filterpress

    sp-11, bb2, airtech L63, L160, L230 vac pumps
    CDL low profile electric releaser
    MES 8000 electric releaser
    CDL 4000 tap mechanical releaser

  4. #4
    Join Date
    Apr 2013
    Location
    Northeast Vermont
    Posts
    655

    Default

    this happened to me just before Christmas! however I wasn't so lucky. I got 3rd degree burns on my hands trying to put the pot in the sink. left a **** spoon in the sink and when I put the pot of syrup/sugar in the sink it hit the spoon and tipped the pot... pouring molted sugar on my left hand. not fun! a trip to the emergency room 2 hours later was the only thing I could do to stop the burning!
    Awfully thankful for an understanding wife!

    “The only place success comes before work is in the dictionary.”
    - Vincent “Vince” Lombardi

    Good luck to all!

  5. #5
    Join Date
    Feb 2016
    Location
    Peru, Maine
    Posts
    1,057

    Default

    It happens more often than not. As soon as it starts to foam up pull it off the stove for a minute and stir then put it back on. Might have to do this 2-3 times but eventually it will settle down and give you a nice steady boil up to 260. You need to keep stirring lightly though to keep it under control.

  6. #6
    Join Date
    Jan 2016
    Location
    MA
    Posts
    589

    Default

    This happened in the mixing bowl not in the pot. Low invert sugars are good for granulated, right? I used my first batch of syrup for this purpose.

  7. #7
    Join Date
    Nov 2005
    Location
    smithville flats ny near binghamton
    Posts
    600

    Default

    Low invert makes it much easier to granulated. High invert can be difficult to get to granulated and definitely takes a lot more stirring.
    shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
    5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
    CDL 20+ RO
    Double 10"filterpress

    sp-11, bb2, airtech L63, L160, L230 vac pumps
    CDL low profile electric releaser
    MES 8000 electric releaser
    CDL 4000 tap mechanical releaser

  8. #8
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    This is why it is a good idea to use a mixing pot that is considerably larger than the quantity of syrup you are trying to granulate. What are you mixing with?
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts