So have a property that is in the vermont current use program. The land owner is wanting me to start sugaring there. But I'm curious if there's any stipulations to using the property for this if he is in current use.
Any help greatly appreciated
So have a property that is in the vermont current use program. The land owner is wanting me to start sugaring there. But I'm curious if there's any stipulations to using the property for this if he is in current use.
Any help greatly appreciated
vacuum
RO
filter press
auto draw
New leader oil fired
http://s712.photobucket.com/albums/ww123/jtrap/
I would have the landowner check with the forester responsible for the property.
CDL 2.5*8 Venturi with all the bells
Leader Clear 5 bank filter press
Memprotec 350H RO
600ish taps and looking for more.
If he is in the current us program, he has to have a forest plan, in that plan is what you can and cannot do. If a maple operation isn't in the it would have to be added.
54 Acres bought in Sept 2010, hope for a lot of fun
Kabota 3400 w/ bucket
couple Husky chainsaws and a couple of Stihl
Big dream
2011 = 106 on gravity tubing, 100 bucket
2012 =700 vaccuum 100 gravity 80 bucket's
30" x 12' Vortex with Leader Revolution Max Raised pans
2013 = 1200 vac, 200 gravity, 5 buckets, buying from 300 buckets, 500 vac
Springtech RO 600 Deluxe
2015= 1800 all vac @ home, buying sap from 1200.
2017= 2200 all on vac. no longer buying sap
We are in current use. Our plan is in place with the help and oversight from a forester. We have the area we currently tap marked out on our use map. We are in the process of redrawing the lines to account for our expansion. We are in the process of meeting with the forester to walk the woods and review the changes. In reading the plan it is very clear it will follow proper tapping guidelines. I have a few undersized trees tapped which I plan to cull, but I am not working in that area and don't have the time to remove them properly right now (no damage to the surrounding lines). So they will stay tapped. We are doing enough cutting in the new area so no trees should have to be removed for quite some time. T
Check the current use plan for guidance. If it needs to change reach out to the forester to initiate the process and receive guidance as to when you can start without upsetting the process.
Mike
Tapping since 1985 (four generations back to early to mid 1900s). 200-250 taps on buckets and then tubing in the mid 90s. 2013- 275 taps w/sap puller 25 gal. 2014-295 taps w/sap puller 55 ga. (re-tapped to vacuum theory) 2015-330 taps full vac. 65 gal, 2016-400 taps 105 gal, 2017-400 taps 95 gal. 2018-additional 800' mainline and maybe 400 new taps for a total near 800 taps. 2x6 Leader WSE (last year on it) supported by a 250 gph RO.