hoods for 2x6
Im in the process of building hoods for my 2x6. How high should the preheater and drip pan be in the hood. I would like to run the inlet side of my drip pan just above the 1 in channel of the hood and the outlet side 1 inch higher so the condensate from drip pan will just drain into the channel. Is this too low ? Also this hood is going to be riveted and not welded is pure silicone safe to use on the hood or is there some other food safe sealant. Last question for now is does this need a 6 inch or 8 inch steam stack? Last year i was boiling 30 to 35 gallons an hour if that helps determine stack size.
Thanks Jeff
2021 230 Taps on vacuum
Smokylake 2X6 pan set with auto drawoff
Homebuilt 2 4x40 membrane RO
Homebuilt filter press
Rebuilt arch with under and over the fire air we have named V 2.0
Smokylake steam bottler
Hoods and preheater
500 gallon vertical polytank to store sap for RO
Adding a laser eye to my bottler for autofill/stop