+ Reply to Thread
Results 1 to 5 of 5

Thread: Atlas Copco GVS60 wiring?

  1. #1
    Join Date
    Mar 2004
    Location
    Northeastern Pa
    Posts
    350

    Default Atlas Copco GVS60 wiring?

    Canít really understand limited documentation in hooking up pump, I canít view the cd that comes with it. Is the three phase motor wired/ set up for 480 or 220/240? The last pump I installed was wired for 480. There is no diagram on motor. Any input appreciated.

  2. #2
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    7,734

    Default

    I suggest you go to Atlas Copco's web site. All of the info should be there. My doubt is that it would be wired 220-240V, but 277 is possible, 480 more likely. Check with the MFGR.
    Dave Klish about 1320 taps in '15, down to about 700 in '16, up to 850 for 2018?
    2012 Mahindra 36 HP 4x4/ loader/cab/heat/AC:-)
    added a gooseneck equipment trailer and F350 to tow it to haul more sap
    3x8 raised flue evaporator
    250 GPH converted to electric, RO by Ray Gingerich
    6.32 KW solar system, 1.48KW is battery backed up, all net metered
    http://s1041.photobucket.com/albums/...anssugarhouse/
    website: www.cnymaple.com

  3. #3
    Join Date
    Jan 2014
    Location
    Merrill,Wisconsin
    Posts
    92

    Default

    Hi have a GVS 60 pump but I can't remember what it is. Iam almost positive it wasn't 480. I would have to go look.

  4. #4
    Join Date
    Mar 2010
    Location
    Berlin,Pa
    Posts
    124

    Default

    It should have a nameplate on motor telling voltages. Sometimes diagram is on nameplate also. If it's a 9 lead motor it could be hooked up for 240 or 480 volt configuration.
    H20 econox 3 membrane
    2250 vacuum
    30"x12' evaporator
    10x31 shack

  5. #5
    Join Date
    Mar 2004
    Location
    Northeastern Pa
    Posts
    350

    Default

    I did a bunch of reading and it is low voltage (6 wire). SO i assume 240 (277), thanks for the input.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts