What are you guys using for a suction hose on your filter press? Last year I used a silicone hose but it collapsed easily. Thanks.
What are you guys using for a suction hose on your filter press? Last year I used a silicone hose but it collapsed easily. Thanks.
Chad
2014: 12 taps, 5 gal buckets
2015: 15 taps on bags
2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
2019: No tapping
2020: 175 taps
2021: 300 taps, homemade RO and releaser
2022: 600+ taps
What diameter were you using? I use a 1" silicone hose and the valves that feed it are full port 1" valves. Mine has not failed and it's been in use for 6-8 years. Are you pumping with a gear pump or air diaphragm pump? If air, slow the pump down a little.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I use the hose with the string in it
Blaisdell's Maple Farm
started on a 2x2 pan in 2000 and now
custom built oil fired 4x12 arch by me
Thor pans Desinged by Thad Blaisdell
4600 taps on a drop flue 8-4 split
I use the same on my bypass hose, but not on suction nor pressure lines.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
Milk hose. It is clear, usually with blue stripe, obviously food grade and thick wall so it doesn't collapse. They should have it at the FleetFarm in Hermantown.
John
2x8 Smokylake drop flue with AOF/ AUF
180 taps on sacks
75 on 3/16 tubing with shurflo
Eden Prairie, Minnesota
Dave
I'm using an air diaphragm pump with 1/2" silicone tubing that collapses when the pump sucks. I have slowed it down but think I shouldn't have to if I have a different tubing.
Thanks for the info and discussion guys. I'll check with Fleet Farm.
Chad
2014: 12 taps, 5 gal buckets
2015: 15 taps on bags
2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
2019: No tapping
2020: 175 taps
2021: 300 taps, homemade RO and releaser
2022: 600+ taps
Radio Silence.
Last edited by amaranth farm; 04-06-2018 at 01:49 PM.