We are poring the pad for the sugar house today. I'm excited.
We are poring the pad for the sugar house today. I'm excited.
2012- 200 buckets 2 by 8 woodfired leader evaporator with hood and pre-heater. 2013-400 taps with cheek valves and new tubing system. 2014-600 taps with cheek valves and wesfab short bank filterpress and a 16 by 16 canner from Leader and a Kubota L3200 sap hauler.2016- new 250 gas powered Ro from Deer Run Maple. New Airablow 1000 tap gas powered vacuum pump and 1000 tap duel releaser and 1800 ft of sap transfer line to sugar house and down to 540 taps.
Good for you. It is exciting! I have my new finishing room forms in and should poor in the next week or so.
2021 230 Taps on vacuum
Smokylake 2X6 pan set with auto drawoff
Homebuilt 2 4x40 membrane RO
Homebuilt filter press
Rebuilt arch with under and over the fire air we have named V 2.0
Smokylake steam bottler
Hoods and preheater
500 gallon vertical polytank to store sap for RO
Adding a laser eye to my bottler for autofill/stop
Great, how big is your sugar house going to be?
Sugaring for 45+ years
New Sugarhouse 14'x32'
New to Me Algier 2'x8' wood fired evaporator
2022 added a used RB25 RO Bucket
250 mostly Sugar Maples, 15% Soft Maples. Currently,(110on 3/16" and 125 on Shurflo 4008 vacuum, 15 gravity), (16,000 before being disabled)
1947 Farmall H and Wagon with gathering tank
2012 Kubota with forks to move wood around
We need to see pictures.
Gary / Zena Crossroads / 42˚ 00' 24" N / Hobby in Early '70s, Addiction since 2014
175+ taps on 3/16 (60 of which are on two Lunchbox Vac/Releasers)
12x34 timber framed sap house w/attached 10x34 shed roof for storage
2 x 6 Smoky Lake hybrid pan on Corsair arch with AUF/steam hood/preheater/concentric exhaust
7.0 KW Sun Power PV System, Smokey Lake Filter Press/Steam Bottler, Modified NGMP RO - 2 4x40 posts 200 gph
it is 20 by 24,with a drain in the floor. As far as pics I will have to see if one of my boys will do that for me. I'm no good at that. I have a dumb phone,LOL. Put the power trowel on it and is it smooth. will be easy to clean. How do you post pics on here?
2012- 200 buckets 2 by 8 woodfired leader evaporator with hood and pre-heater. 2013-400 taps with cheek valves and new tubing system. 2014-600 taps with cheek valves and wesfab short bank filterpress and a 16 by 16 canner from Leader and a Kubota L3200 sap hauler.2016- new 250 gas powered Ro from Deer Run Maple. New Airablow 1000 tap gas powered vacuum pump and 1000 tap duel releaser and 1800 ft of sap transfer line to sugar house and down to 540 taps.