Originally Posted by
Maple Man 85
We researched before we went with the 4/12 and have stamped plans by an engineer to make sure the roof was able to withstand anything a Wi weather could throw at it.
That's good, but you may not be able to add "avalanche stops" (snow guards) to help hold the snow load from sliding off. Ask your engineer if snow guards can be used before using any if you decide you don't want the snow coming off all at once.
Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.