+ Reply to Thread
Results 1 to 9 of 9

Thread: Design for IBC 275g Tote larger opening and latch?

  1. #1
    Join Date
    Mar 2016
    Location
    Killington, VT
    Posts
    16

    Default Design for IBC 275g Tote larger opening and latch?

    Hi everyone - I have a couple 275g IBC totes for sap tanks and am about to cut open a hole in the top to fit a sinkable heater inside (they are totally full and frozen). I also like the idea of a larger opening on the top for cleaning. Does anyone have ideas or pictures of their own design for cutting out an opening and making a weather proof cover? Thanks.

  2. #2
    Join Date
    Mar 2005
    Location
    Albion PA
    Posts
    5,099

    Default

    The size of a 5 gallon bucket in one corner so you can use the bucket to fill the hole?
    Regards,
    Chris
    Casbohm Maple and Honey
    625 roadside taps + Neighbors bring some sap too!
    3x10 King, WRU, AOF and AUF
    12" SIRO Filter Press.
    2015 Ford F250 PSD sap hauler
    One Golden named Maggie, Norwegian Forest Cat named Lucy
    Too many Cub Cadets
    Ford Jubilee and several Allis WD's, and IH tractors
    1932 Ford AAB ton and a half, dump truck

    www.mapleandhoney.com

  3. #3
    Join Date
    Jan 2015
    Location
    Catskill Mts, Ulster County NY
    Posts
    605

    Default

    Gary / Zena Crossroads / 42˚ 00' 24" N / Hobby in Early '70s, Addiction since 2014

    175+ taps on 3/16 (60 of which are on two Lunchbox Vac/Releasers)
    12x34 timber framed sap house w/attached 10x34 shed roof for storage
    2 x 6 Smoky Lake hybrid pan on Corsair arch with AUF/steam hood/preheater/concentric exhaust
    7.0 KW Sun Power PV System, Smokey Lake Filter Press/Steam Bottler, Modified NGMP RO - 2 4x40 posts 200 gph

  4. #4
    Join Date
    Mar 2011
    Location
    Maine
    Posts
    50

    Default

    This is what I used on mine. Much easier to clean and access.


    https://www.amazon.com/Catch-Cover-C...0287545&sr=8-2
    2020 - 320 Taps
    2x5 Raised Flue Lapierre Waterloo Small Evaporator
    WF Mason Finisher/Canner

  5. #5
    Join Date
    Jan 2015
    Location
    Catskill Mts, Ulster County NY
    Posts
    605

    Default

    That looks pretty good. Does that cap screw on?
    Gary / Zena Crossroads / 42˚ 00' 24" N / Hobby in Early '70s, Addiction since 2014

    175+ taps on 3/16 (60 of which are on two Lunchbox Vac/Releasers)
    12x34 timber framed sap house w/attached 10x34 shed roof for storage
    2 x 6 Smoky Lake hybrid pan on Corsair arch with AUF/steam hood/preheater/concentric exhaust
    7.0 KW Sun Power PV System, Smokey Lake Filter Press/Steam Bottler, Modified NGMP RO - 2 4x40 posts 200 gph

  6. #6
    Join Date
    Mar 2006
    Location
    Eden Prairie, MN
    Posts
    1,636

    Default

    I thought about a bigger hatch like that, but in the end, just cut the whole top off just short of full width. Threw a sheet of clear 1/4 polycarbonate over it just inside the cage and bungie it down. So happy with this setup. You can look down in easily, and just as easily remove the whole top. If it is time to clean it, I remove the sheet and toss in a towel to stand on and hop in there. Wipe down the sides with a damp cloth, or some peroxide if needed and hop back out. We just added an outdoor fireplace cover that can cover the top third of the tank to keep stuff from blowing in around the edges, which does happen since the seal is far from perfect.
    John
    2x8 Smokylake drop flue with AOF/ AUF
    180 taps on sacks
    75 on 3/16 tubing with shurflo
    Eden Prairie, Minnesota

  7. #7
    Join Date
    Mar 2011
    Location
    Maine
    Posts
    50

    Default

    Quote Originally Posted by Ghs57 View Post
    That looks pretty good. Does that cap screw on?
    No, it just snaps in. It isn't a watertight seal, so if water pools on top of your tank, it could leak in around it. My tanks are undercover, so it works fine for me.
    2020 - 320 Taps
    2x5 Raised Flue Lapierre Waterloo Small Evaporator
    WF Mason Finisher/Canner

  8. #8
    Join Date
    Feb 2009
    Location
    44.3° N° 69.1° W
    Posts
    310

    Default

    As Sugarmaker said. This what I have done. Cut the bottom of the bucket out. You can seal around the bucket with food grade sealant if desired
    Attached Images Attached Images
    " A man who carries a cat by the tail learns something he can learn in no other way."
    Mark Twain
    900 plus taps , 435 vacuum, 565 gravity
    2.5 x 10 Thor on Tsunami arch
    H2O Concentrater 300
    Squeezing Bees
    and
    Draining Trees
    Since 1980
    http://www.sparkyshoneyandmaple.com/about.html

  9. #9
    Join Date
    Mar 2015
    Location
    Esko,MN
    Posts
    290

    Default

    IMG_2285.jpgIMG_2205.jpg

    I use the catch cover and remounted the original tote openong to a corner. I have three 3/16 lines running into the tank and suck the sap out th larger cover via a bilge pump to my transfer tank. Everything stays nice and clean.
    Last edited by DocsMapleSyrup; 03-24-2017 at 09:03 PM.
    Chad

    2014: 12 taps, 5 gal buckets
    2015: 15 taps on bags
    2016: 150 taps: 100 on bags, 50 on 3/16" natural vac, 2x8 AUF/AOF Homebuilt Arch, 2x8 SL Drop Flu & Auto Draw, SL Propane Canner/Bottler
    2017: 225 taps: Built Lean to, Added SL hood, preheater, concentric exhaust, SL SS 7" SB Filter Press
    2018: 180 taps: Added Shurflo to 50 - 3/16", Auto fill sensor to head tank
    2019: No tapping
    2020: 175 taps
    2021: 300 taps, homemade RO and releaser
    2022: 600+ taps

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts