How to fix 22 cal holes in a poly tank

[jcb]

I have a 1500 gal tank that has 9 holes in it from a 22. I was thinking of drilling the holes out and putting a #10 ss machine screw with a couple fender washers with rubber flat washers and squeezing it together with a nut. I think this will work I was just looking for other ideas on hoe to fix it.

[Woodsrover]

Depending on the exact material you can probably weld it. Also, 3M and others have some pretty good two-part plastic repair material. Visit your local bodyshop and they'll be able to help you out.

[WESTMAPLES]

honestly sounds like a bullet proof idea you have for fixing it , did you get the tank that way or was someone being a `richard` to you ??

[steam maker]

honestly i think the guy that came up withe the bolt and fender washer idea is a complete genius!!!!!!!!!!!! if only the genius could figure out his own float switch problem the worlds problems would be solved!!!! ill be at my disaster soon if u need help

[jcb]

tank was brand new this year with no holes in it

[jcb]

I will check with the guy who does my body work thanks

[jcb]

[Burnt sap]

Food grade silicone will work short term to get you through in a pinch.

[Cody]

Leak Ender 2000 or Flex Seal,you can cut a boat in half,tape or spray good to go,you've seen the commercial,has to work.

[BAP]

In the past I fixed a plastic with a 2 part epoxy made for plastic. I think I got it at the local hardware store.