going from truck tank to holding tank for ro. food grade any ideas
1 1/2 inch flexable tubing
going from truck tank to holding tank for ro. food grade any ideas
2012
12 X16 sugar shack
2X6 Patrick Phaneuf hood/pre-heater
260 taps tubing with guzzler and 12 buckets
Rays 250 RO
950 John Deere
Tigerflex is what I use.
Tiger flex. Leader, CDL both sell it. Hard to get on internet except in large quantity.
thanks looking into it
2012
12 X16 sugar shack
2X6 Patrick Phaneuf hood/pre-heater
260 taps tubing with guzzler and 12 buckets
Rays 250 RO
950 John Deere
You can find it online sold by the foot.
Sugaring for 45+ years
New Sugarhouse 14'x32'
New to Me Algier 2'x8' wood fired evaporator
2022 added a used RB25 RO Bucket
250 mostly Sugar Maples, 15% Soft Maples. Currently,(110on 3/16" and 125 on Shurflo 4008 vacuum, 15 gravity), (16,000 before being disabled)
1947 Farmall H and Wagon with gathering tank
2012 Kubota with forks to move wood around
I use Spiralite 170, milk hose. I get it from Eastern Crown Inc. in Vernon, NY. It is food grade and rated from -10 to +130 F. They sell it by the foot and the price is good. Fast shipping too, same day if you order before noon. Likely other dairy supply vendors sell it too.
Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.
I use left over chunks of mainline.1.5" for the ro and 1.25" for the submersible extractor
Ian McDonald
2000 on vacuum
1000gph cdl ro
2.5'x12' intensofire
If you can go to 2 inch, your local milk hauler will have used 2 inch milk hose that they have to discard. Very flexible in cold Temps and it's free. Usually in 33 foot lengths.
shrunken producer, from 8,000 taps to 4,000 to 5800 to 9500 to 11,000 vac
5x16 woodchip fired evaporator with 5x10 max flue and 5x6 revolution front pan
CDL 20+ RO
Double 10"filterpress
sp-11, bb2, airtech L63, L160, L230 vac pumps
CDL low profile electric releaser
MES 8000 electric releaser
CDL 4000 tap mechanical releaser
Posting Permissions
Reply With Quote
