Any one have experience with this valve? is it worth the money?
Leader fill stop dispenser valve
Any one have experience with this valve? is it worth the money?
Yes and yes they are worth the money. My Wife even loves them now,there was a little hesitation at first.
Blaisdell's Maple Farm
started on a 2x2 pan in 2000 and now
custom built oil fired 4x12 arch by me
Thor pans Desinged by Thad Blaisdell
4600 taps on a drop flue 8-4 split
I built 2 that are similar to Leader's. I would not bottle without them.
William
950 taps
3 X 12 Thor pans on a Brian Arch
CDL 600 expandable
Wiam what did you use for a probe for the stop fill? I have all the parts to make one just could not figure out the probe.
2021 230 Taps on vacuum
Smokylake 2X6 pan set with auto drawoff
Homebuilt 2 4x40 membrane RO
Homebuilt filter press
Rebuilt arch with under and over the fire air we have named V 2.0
Smokylake steam bottler
Hoods and preheater
500 gallon vertical polytank to store sap for RO
Adding a laser eye to my bottler for autofill/stop
Just the end of the "stop" wire. I used half of wire tie around the nozzle and a rubber oring up higher to hold it.
William
950 taps
3 X 12 Thor pans on a Brian Arch
CDL 600 expandable
I understand how to mount it but what did you use for a stop wire and how does it close the valve?
2021 230 Taps on vacuum
Smokylake 2X6 pan set with auto drawoff
Homebuilt 2 4x40 membrane RO
Homebuilt filter press
Rebuilt arch with under and over the fire air we have named V 2.0
Smokylake steam bottler
Hoods and preheater
500 gallon vertical polytank to store sap for RO
Adding a laser eye to my bottler for autofill/stop
It is a piece of 22 gauge coated wire.
William
950 taps
3 X 12 Thor pans on a Brian Arch
CDL 600 expandable
You're killing me! Is this top secret? I'll stop asking lol I have 22 coated wire what does it get hooked to?
2021 230 Taps on vacuum
Smokylake 2X6 pan set with auto drawoff
Homebuilt 2 4x40 membrane RO
Homebuilt filter press
Rebuilt arch with under and over the fire air we have named V 2.0
Smokylake steam bottler
Hoods and preheater
500 gallon vertical polytank to store sap for RO
Adding a laser eye to my bottler for autofill/stop
If you were pondering selling a product you built, would you tell how you made it??Originally Posted by Wanabe1972
William
950 taps
3 X 12 Thor pans on a Brian Arch
CDL 600 expandable
No I probably wouldn't. Enough said. I have a few probes in mind but did not want to shell out a bunch for R&D. Thanks Jeff
2021 230 Taps on vacuum
Smokylake 2X6 pan set with auto drawoff
Homebuilt 2 4x40 membrane RO
Homebuilt filter press
Rebuilt arch with under and over the fire air we have named V 2.0
Smokylake steam bottler
Hoods and preheater
500 gallon vertical polytank to store sap for RO
Adding a laser eye to my bottler for autofill/stop
Posting Permissions
Reply With Quote