+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: New Sugarhill Containers

  1. #1
    Join Date
    Jan 2013
    Location
    ohio
    Posts
    106

    Default New Sugarhill Containers

    Has anyone had any experience with the new Sugarhill containers that use a label instead of direct printing on the jug? We have had issues with the label wrinkling after bottling hot syrup. Just wondering if anyone else has had this problem?

  2. #2
    Join Date
    Oct 2007
    Location
    Wellsboro Pa
    Posts
    305

    Default

    I haven't had any issues with that. I did have a whole case of 1/2 gallon that had bubbles when I took them out of the box. Also had 1 quart that the label was folded in half right in the middle. My wife says I should save all the bad ones and return them and ask for a refund. So far they don't appear to be muck worse than the printed which have a bad jug every 1000 or so.

  3. #3
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,575

    Default

    Not yet. I do wish they hadn't changed though, if it ain't broke, don't fix it. Sugarhill has a new owner, that might be a change brought on by the bean counters.
    Dave Klish, I recently ordered a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  4. #4
    Join Date
    Nov 2010
    Location
    Barnet, VT
    Posts
    2,580

    Default

    Friend had some wrinkle at the seem when left in sugar house after freeze/thaw.
    Attached Images Attached Images
    William
    950 taps
    3 X 12 Thor pans on a Brian Arch
    CDL 600 expandable

  5. #5
    Join Date
    Nov 2008
    Location
    Adirondacks
    Posts
    2,786

    Default

    Wait so sugar hill uses a label and not direct printed on the jug?
    FIRST GENERATION SUGARMAKER
    First boil 2/22/2012! Went Pefect!
    3,500' of laterals
    1,000' of mainline
    2012 - 105 taps on gravity, 12 sap sacks.
    2013 - 175 taps on gravity, 25 on sacks = 200 taps for 2013! Second year.
    2014 - 250 taps on gravity, 25 on sacks
    Tapped on February 16, 2014
    2015 - adding vac sap puller no more gravity for me!
    275 gallon holding tank for 2014
    20'x30' Sugarhouse

  6. #6
    Join Date
    Nov 2010
    Location
    Barnet, VT
    Posts
    2,580

    Default

    Quote Originally Posted by adk1 View Post
    Wait so sugar hill uses a label and not direct printed on the jug?
    New and improved.
    William
    950 taps
    3 X 12 Thor pans on a Brian Arch
    CDL 600 expandable

  7. #7
    Join Date
    Oct 2007
    Location
    Wellsboro Pa
    Posts
    305

    Default

    Correction! Just new.

  8. #8
    Join Date
    Nov 2010
    Location
    Barnet, VT
    Posts
    2,580

    Default

    Quote Originally Posted by upsmapleman View Post
    Correction! Just new.
    Might have been sarcasm there
    William
    950 taps
    3 X 12 Thor pans on a Brian Arch
    CDL 600 expandable

  9. #9
    Join Date
    Sep 2009
    Location
    northfield,mass
    Posts
    251

    Default

    so r all the jugs from them getting the "new" sticker? or just certain runs?
    4 by 12 cdl
    Cdl 3 post ro , 4th post waiting to get added
    5 hp sihi vaccum pump, 3/4 hp airblo vaccum pump, gv60 atlas copco vaccum pump www.roundmountainsugarhouse.com.

  10. #10
    Join Date
    Jun 2012
    Location
    Wantage, NJ
    Posts
    158

    Default

    Or is it a way to force you to get your own printing on the bottle. The bottles are cheaper by the last I checked there was about a $500 setup cost.
    Dave C.
    2011 - 130 Taps
    2017 - 300 Taps (all gravity)
    2x8 Leader Revolution Evaporator
    12x18 Sugarhouse
    2021 - 350 taps
    Leader Micro2 RO
    Leader Clear Filter press
    2023 - 390 Taps

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts