Quote Originally Posted by Clinkis View Post
Should work just fine. I ran about 100 taps on 600' of 3/4 mainline with a sureflo last year. Under 2% slope. Pulled 20+ inches consistently. Doubled my production. Key is minimizing leaks and sags in mainline. These pumps don't have the CFM's to overcome any leaks.

I don't have any pics but my setup was very simple. A 3/4" cam lock on the end of mainline necked down to 1/2" into pump. I brought my pump in at night if going to be really cold. A couple alligator clips to attach to deep cycle battery. Just sat pump on top of battery.
What size batteries do you guys run and how long can you get them to operate for? Putting in a 100-115 tap 3/4 main system now. I will use my 300 gallon milk tank for a collecting tank. So, I will have storage capacity. Figure a small pump and a battery would be cheaper than another 100 tap line running in.

Sent from my SM-G900V using Tapatalk