+ Reply to Thread
Results 1 to 6 of 6

Thread: head tank height and feed line size for 2.5x8

  1. #1
    Join Date
    Sep 2015
    Location
    Rumney NH
    Posts
    126

    Default head tank height and feed line size for 2.5x8

    Hi guys , just setting up for upcoming season. how high should head tank be above float box. I read this somewhere but can not find it again.

  2. #2
    Join Date
    Jul 2013
    Location
    Buxton Foreside Maine
    Posts
    248

    Default

    Depends on what your end goal is. If there is a chance of a pre heater or steam away you are going to want it higher. 6" to 12" above your float box will work. If you are thinking steam a way at some point you will want your tank about 8' off the ground


    Sent from my iPhone using Tapatalk
    2014 125 taps 16 gallons
    2015 210 taps 49 gallons
    2016 164 taps 75 gallons new 2X6 leader max flue and homemade AOF/AUF arch
    2017 1500 taps 196 gallons RO added additions to building new tap lease
    2018 1588 taps 276 gallons
    upgrades for 2019 season 3 phase vacuum pump, stainless tank in woods, tubing replacement

  3. #3
    Join Date
    Sep 2015
    Location
    Rumney NH
    Posts
    126

    Default

    I have a steam hood preheater above flue pan. but only 4 feet between bottom of head tank (275 gal) and inlet of steam hood. at set right now ,but sap house is still under construction.

  4. #4
    Join Date
    Nov 2010
    Location
    Barnet, VT
    Posts
    2,580

    Default

    That sounds fine. I would use 1" for feed pipe. Probably bigger than needed but better than not getting enough sap.
    William
    950 taps
    3 X 12 Thor pans on a Brian Arch
    CDL 600 expandable

  5. #5
    Join Date
    Aug 2006
    Location
    Andover NH
    Posts
    2,074

    Default

    I agree on 1". we used copper for thawing and have a ss union on one end by the valve on the feed tank
    Eric Johnson
    Tucker Mountain Maple Co-op
    1400 taps in 2013
    2.5 x 8 CDL pellet arch and Smokey Lake pans
    Lapierre 600 RO
    Member of Andover/Salisbury Maplehaulics anonymous
    www.tuckermtn.com
    pALS

  6. #6
    Join Date
    Sep 2015
    Location
    Rumney NH
    Posts
    126

    Default

    thanks for the replies.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts