Where can I buy 3/4" mainline PVC tubing?

[longlivenintendo]

Hey guys,

I've been finding some maple farm sites selling Polyethylene tubing but because I don't want my tubing to be a permanent installation I hear PVC is best for re installation. Where can I find some sellers?

Cheers,

Ben

[longlivenintendo]

http://www.lowes.com/pd_289924-61002...&storeId=10151

is this the same stuff that can be used?

[unc23win]

I guess I am curious as to why pic would be easier to take down? Seems to me maple tubing would be easier to take down and reinstall next season as it is a quite a bit easier to work with than pex as far as unspooling and spooling. Sure you have to be careful not to kink it. If I were going to take it down after each season I would use maple tubing the smallest diameter suitable for the number of taps 3/4" is probably a good choice and then I would get an old spool from electric co or phone co and use that to spool it back up. Also I am not sure how you are planning on running your lines, but 3/4" saddles might not fit pex often times water pipe has a bigger OD than sap tubing.

[longlivenintendo]

I guess I am curious as to why pic would be easier to take down? Seems to me maple tubing would be easier to take down and reinstall next season as it is a quite a bit easier to work with than pex as far as unspooling and spooling. Sure you have to be careful not to kink it. If I were going to take it down after each season I would use maple tubing the smallest diameter suitable for the number of taps 3/4" is probably a good choice and then I would get an old spool from electric co or phone co and use that to spool it back up. Also I am not sure how you are planning on running your lines, but 3/4" saddles might not fit pex often times water pipe has a bigger OD than sap tubing.

I was going off of an instruction manual on tubing installation and they say that PVC is used to take down and reinstall every year.

[unc23win]

Well your all set then.

[West Mountain Maple]

i don't think pex is pvc, cross linked polyethylene, to rigid to work with standard maple fittings, and as stated probably different diameter

[mellondome]

I was going off of an instruction manual on tubing installation and they say that PVC is used to take down and reinstall every year.

What manual is this? What was its publication date?

[DrTimPerkins]

I hear PVC is best for re installation.

You should probably use semi-rigid polyethylene (standard semi-rigid maple tubing) for the laterals and droplines, and either standard black water pipe or maple mainline tubing for your mainlines. PVC was standard in the industry as lateral/dropline tubing 30 yrs ago, but has been supplanted by polyethylene tubing, which is far superior for lots of reasons. Don't get your tubing from a hardware store (unless they carry maple tubing)...buy the real thing. Otherwise the fittings may not work depending upon the ID of the tubing, and the real rigid stuff that you will find at those places will be quite difficult to work with.

[OldManMaple]

From the description in the link you provided,
note the last line:

3/4-in x 100-ft 160-PSI PEX Pipe

For use with hot and cold potable water applications
Flexible and lightweight
Suitable for harsh water conditions
Corrosion and freeze damage resistant
Do not store or install in direct sunlight

[tuckermtn]

CDL Rapidtube?