+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Calculating your break Even point -BEP-

Hybrid View

  1. #1
    Join Date
    Mar 2013
    Location
    Hoosick Falls
    Posts
    2,000

    Default Calculating your break Even point -BEP-

    I am looking for producers to calculate their Break Even Point so it can be compared to the bulk price.

    Different operations: Sap Producers only, Syrup from Purchased Sap, Bulk Producers, Bottlers, Tap to Bottle Producers, etc.

    There are many people that have stated, keep your costs down and others that "Need New Rigs and equipment" to keep their tour business going. I am looking to see how costs on real production amounts vary and what different style of operations costs to make their product that is sold.

    If you change your tubing every 10 years spread the tubing cost over 10 years, 15, 20, what ever. I am going to make a spread sheet that can be used to assist in the calculation if there is interest.

    I have a friend that wants to get back into production...should he, at 50 buy new, used, sell sap, sell bulk, go full farm, or forget about it??? Looking for honest data not just a quick worded response. He and his dad also ran a 5 x16 wood fired rig for many years.

    I am expecting many different operations but a future trader can find an operation similar to theirs and see what to expect.

    I do not want to know how you sold your product or what you get for it...this is all about costs and the total gallons you produced in one season or you can average your seasons and what your total expenses are.

    Who's in?

  2. #2
    Join Date
    Jan 2011
    Location
    Southern Ohio
    Posts
    1,362

    Default

    There was a thread last year on one of the forums, here or SBI, doing the same thing. See if you can find it and get some info. I have a spreadsheet I track expenses, sap, syrup production and sales on that tells me when I have paid expenses and made a profit and my production stats. I have offered it for sharing before, but I will clear my data from it first. The formulas will still be intact. The two times I purchased pans or complete evaporators I spread those expenses over five years.

  3. #3
    Join Date
    Sep 2010
    Location
    Vermont
    Posts
    2,244

    Default

    I don't mind sharing numbers but I would never want my name beside those numbers. If I did Mr. Uncle Sam would make sure SPUD went away for a very long time. Please don't tell me I'm the only one thinking this way.

    My real name is BOB Barker.

  4. #4
    Join Date
    Jan 2006
    Location
    Sugarhill NH
    Posts
    723

    Default

    Do you mean we aren't supposed to operate in the red. Three years of minimal sap flow. Can't squeeze sap out of frozen trees or trees that are too hot.
    30x8 Leader revolution, wood fired blower, steamaway/hood. 903 taps all but 54 on pipeline and 3 vacuum systems. Hauling sap this year with a 99 F350 7.3 diesel dump and of course back up is the Honda 450 and trailer.

  5. #5
    Join Date
    Mar 2013
    Location
    Hoosick Falls
    Posts
    2,000

    Default

    I hear ya. My last two have been less than adequate. Seems when the trees get going the temp goes into the 60's. So I am going back to being able to cool the sap again.

    I am just looking to see how inexpensive it can be done. You take new rigs every 5-7 years depending on how you depreciate them out and you can be in the red for ever.

    I am looking at a new rig in a couple more season and it will be in the 25K range and that is still taking a $4000 bite every year over 7. in a poor season that around 600 of the taps going to that payment annually.

    No you don't need to stay out of the red; but if I want to sleep in the nice warm bed, next to my honey...I do. The hay loft gets darn cold when its -27 last winter. And at fifty I don't get much sugar in the hay loft an more. LOL

  6. #6
    Join Date
    May 2009
    Location
    Essex VT
    Posts
    410

    Default

    I had actually previously calculated my 2105 break even point after a conversation with a fellow sugar maker earlier this year about the possibility of bulk buyers paying $.75 a pound for off taste syrup.
    However, to make the numbers more accurate by looking at more than one year, I went back to 2010. I included taxes, insurance, 10 year tubing replacement, five year drop line replacement, and all of the associated direct production costs. No equipment purchases or depreciation.

    2010 $11.27 478 gal syrup
    2011 $12.70 378 gal syrup
    2012 $22.21 216 gal syrup
    2013 $12.48 508 gal syrup
    2014 $12.14 1067 gal syrup
    2015 $9.91 1007 gal syrup ( concentrated sap to higher %, sap much higher in sugar than ever before)

    So, leaving out the short 2012 season, it averages out that my break even point is $11.70. Since 2015 may turn out to be an anomaly year, it might really be $12.14 leaving out 2015.

    Joe
    2004- 470 taps on gravity and buckets
    2006- 590 taps on gravity and buckets 300 gph RO
    2009- 845 taps on vacuum no buckets, 600 gph RO
    2010- 925 taps on vacuum new 2 stage vacuum pump
    2014- 3045 taps on vacuum, new 1200 gph RO
    2015- 3104 taps on vacuum
    2017- 3213 taps on vacuum
    3' x 10' oil fired evaporator with steamaway

  7. #7
    Join Date
    Sep 2010
    Location
    Vermont
    Posts
    2,244

    Default

    BreezyHill- When I set my woods up I started with 5000 taps. A year later I added 1000 more taps. Last year I added 3000 more taps. In my expenses I did not add the cost of my stainless sap tanks because they will last a lot longer then 10 years. Here is what I added for expenses. Please tell me if I am forgetting something.

    All mainline
    All tubing
    All fittings, wire, wire ties, saddles, Ts, connectors etc.
    2-Vacuum pumps
    2- Releasers
    spouts for 10 years
    labor (I give the kids a little money when they help).
    Electric bill for 10 seasons (average)
    Taxes on land
    Coffee and Sarah Lee Pound Cake (while waiting for sap to run).
    Tools (drills, tubing tools and other stuff)

    For the 9000 taps my break Even Point is $17,000 or $1.89 per tap. I average 20 GPT. My average sugar is 1.8%. If I boiled my sap I would average 93 barrels (40 Gallon barrels). I hope this helps.

    Spud

  8. #8
    Join Date
    Apr 2009
    Location
    Bristol, VT
    Posts
    1,978

    Default

    My business model is a bit different than Spud's or JoeJ's so I look at this as my cost to make one gal. of syrup. I used my 2015 stats. as these are likely closer to a typical year without building a new sugarhouse and setting up a new woods from nothing which was the 2014 season. This includes loan payments for new equipment, insurance (which is likely more per gal. than most pay due to insuring equipment in a commercial kitchen), taxes, some new tubing/mainline/fittings and spouts for about 100 taps and some drop replacement and repairs, tap lease, utilities and operating expenses like chainsaw fuel, filter papers, etc... I did not include fuel costs (wood) except for related equipment costs to cut it.

    So with 748 taps and 300 gal. table grade syrup and 25 gal. of commercial syrup (filtered very dark strong with slight bud off flavor) produced, my cost/gal. was just over $20/gal.

    For clarity this does not include any costs to then take the syrup produced and make value added products to then retail. Those costs include things like equipment, commercial kitchen rental, state inspection and licensing, travel costs, website and credit card sales administration, farmer's market expenses, packaging, etc...

    Obviously it would be absurd for me to sell syrup bulk, and I do not except for this year about 15 gal. of the commercial. At this point I'm not going to get into the details of my costs and income from retail sales of my syrup.

    The BEP for an operation is going to likely be different for every producer. Most likely don't consider their time in their accounting, though many likely pay others to help. I personally am a one man operation with help form my wife when she can, and from a couple friends when they are free, though they just generally come over and drink beer while I work. I suspect most wood operations that cut their own wood, like me, think of their fuel as free. Others may have equipment and tools from another profession or business that allow them to operate at a lower expense.

    In terms of available resources for calculating your BEP and for financial planning, I have found UVM's "worksheets" to be helpful, (found here: http://www.uvm.edu/extension/maple/?...lications.html) and Rand posted an interesting spreadsheet last year here on the trader that can be found here:

    http://mapletrader.com/community/sho...ht=spreadsheet
    About 750 taps on High Vac.
    2.5 x 8 Intens-O-Fire
    Airtech 3 hp LR Pump
    Springtech Elite 500 RO
    14 x 24 Timber Frame SugarHouse
    16 x 22 Sap Shed w/ 1500 gal. + 700 gal. tanks
    www.littlehogbackfarm.com

  9. #9
    Join Date
    May 2009
    Location
    UVM Proctor Maple Research Center, Underhill Ctr, VT
    Posts
    6,441

    Default

    Quote Originally Posted by GeneralStark View Post
    In terms of available resources for calculating your BEP and for financial planning, I have found UVM's "worksheets" to be helpful, (found here: http://www.uvm.edu/extension/maple/?...lications.html) and Rand posted an interesting spreadsheet last year here on the trader that can be found here:
    Folks might check out http://blog.uvm.edu/farmvia/files/20...-Benchmark.pdf for more information on this topic. Mark Cannella (UVM Extension) has done quite a bit on this work, which is continuing. He'll be doing talks at the Vermont Maple Conferences in Hyde Park and Bellows Falls in January 2016.
    Dr. Tim Perkins
    UVM Proctor Maple Research Ctr
    http://www.uvm.edu/~pmrc
    https://mapleresearch.org
    Timothy.Perkins@uvm.edu

  10. #10
    Join Date
    Dec 2005
    Location
    Knapp, Wis
    Posts
    1,873

    Default

    May be a bit off topic, but to keep on cooking commercial in the spring with current bulk prices is a waste of my time. I'm better off working extra hours in town and save the grief.
    Mark

    Where we made syrup long before the trendies made it popular, now its just another commodity.

    John Deere 4000, 830, and 420 crawler
    1400 taps, 600 gph CDL RO, 4x12 wood-fired Leader, forced air and preheater. 400 gallon Sap-O-Matic vacuum gathering tank, PTO powered. 2500 gallon X truck tank, 17 bulk tanks.
    No cage tanks allowed on this farm!

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts