+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Source for tubing information?

  1. #1
    Join Date
    Feb 2013
    Location
    Freedom, IN.
    Posts
    184

    Default Source for tubing information?

    Can anyone direct me to a source of information, (a book perhaps?) that discusses gravity tubing in detail? There's a ton of great info right here on the forum, but I'm having a hard time making sense of it all due to my complete lack of knowledge about the subject. Something that starts with the basics and goes forward would be extremely helpful, as we have a place that, to me anyway, appears well suited to a gravity tubing operation.

    Would love to study up on the subject over the summer.

    Thanks!

  2. #2
    Join Date
    Apr 2014
    Location
    Wakefield,New Hampshire
    Posts
    505

    Default

    Everything you need to know can be found here. http://www.uvm.edu/~pmrc/ Combine that site with this forum and you will have your set up figured out by next season for sure! Good luck

  3. #3
    Join Date
    Mar 2006
    Location
    Acworth, NH
    Posts
    960

    Default

    I suggest not reading into it to much. KISS is a well applied acronym keep line tight and slopped down hill and you will be fine.

  4. #4
    Join Date
    Jan 2012
    Location
    Malone,NY
    Posts
    252

    Default

    North American Maple producers manual. It will have eveything you need.
    2012- 200 buckets 2 by 8 woodfired leader evaporator with hood and pre-heater. 2013-400 taps with cheek valves and new tubing system. 2014-600 taps with cheek valves and wesfab short bank filterpress and a 16 by 16 canner from Leader and a Kubota L3200 sap hauler.2016- new 250 gas powered Ro from Deer Run Maple. New Airablow 1000 tap gas powered vacuum pump and 1000 tap duel releaser and 1800 ft of sap transfer line to sugar house and down to 540 taps.

  5. #5
    Join Date
    Mar 2013
    Location
    Easton, Maine
    Posts
    235

    Default

    https://www.bascommaple.com/item/bdim/books/

    This is a pretty good book that covers the basics.

    https://www.bascommaple.com/item/bdim/books/
    I've never read this one, but is a guide to vacuum and tubing.
    You don't have to buy either from Bascom, just the easiest place for me to link to.

  6. #6
    Join Date
    Jan 2006
    Location
    Oneida NY
    Posts
    11,688

    Default

    Another great book is Steve Childs "Tubing Handbook". However it was written before the new 3/16 concept.
    Dave Klish, I recently bought a 2x6 wood fired evaporator from A&A Sheet Metal which I will be converting to oil fired
    Now have solar, 2x6 finish pan, 5 bank 7x7 filter press, large water jacketed bottler, and tankless water heater.
    Recently bought another Gingerich RO, this one was a 125, but a second membrane was added thus is a 250, like I had.
    After running a 2x3, a 2x6, 3x8 tapping from 79 taps up to 1320 all woodfired, now I'm going to a 2x6 oil fired and a 200-425 taps.

  7. #7
    Join Date
    Feb 2013
    Location
    Freedom, IN.
    Posts
    184

    Default

    Thanks everyone, I have a couple books on order and I'm reading through the suggested links. Very helpful!

    I'm sure that the resources you all have suggested will provide the answers to my questions, of which there are a great many. But for right now, can someone confirm or correct my understanding of a gravity tubing setup?

    The mainline carries sap down to the collection tank? Laterals, branch off the mainline and run up to groups of trees? Drop lines run from the taps to the laterals? Is all of this connected using simple "T" fittings?

  8. #8
    Join Date
    Jan 2013
    Location
    Southcentral PA
    Posts
    91

    Default

    I'm the same way. I read threads on tubing, but some of the terminology goes over my head. I'd like to understand more of what I read.
    BTW... what's a syrup ladder?

  9. #9
    Join Date
    Feb 2013
    Location
    Volney, NY
    Posts
    275

    Default

    Hey, TonyL,
    Yep. It's all connected with T's. Each tree needs a T and a tap. Keep you tubing straight, tight, downhill. Someone here mentioned that you can get your tubing "scary tight"! Drop lines are relatively short (~2'+-) while laterals can occasionally be 100's of feet. Keep posting your questions here for quick, informed answers.
    The advantages of tubing are: faster gathering, earlier thawing, higher sap count. It can cost more than buckets.
    I like the name of your city/town.
    DaveG

  10. #10
    Join Date
    Nov 2014
    Location
    Alaska
    Posts
    15

    Default

    There is also good visual information on you tube. Just search on maple sugaring tubing installation.

+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts